摘要
IF钢的性能评价很大程度上取决于其n值、r值,目前广泛采用的机械引伸计方法受环境影响较大,难以获得准确、稳定的结果。为得到准确的r值,同时研究试验过程中影响r值测量准确性的因素,对IF钢进行拉伸试验并结合数字图像相关(DIC)方法对IF钢的n值、r值进行了测定,与通过机械引伸计测量应变的方法所得结果进行比较,同时,通过DIC方法在试样不同位置添加一系列虚拟横向引伸计以分析横向应变测量位置对材料r值测量的影响。试验结果表明,相比于机械引伸计,DIC方法具有更高的稳定性;虚拟横向引伸计测量位置的不同导致试验结果的不同,测量位置距断裂位置越远则结果误差越大,DIC方法可以保证测量位置及结果的准确性。
The evaluation of the property of IF steel mostly depends on its n-value and r-value,and it is difficult to get the stable and accurate results because the mechanical extensometer which is widely used is severely affected by the experiment environment. To get the accurate r-value and research the factors which influence the measurement accuracy of r-value in the test,the tensile test and digital image correlation( DIC)method are used to measure the n-value and r-value of IF steel and the experimental results are compared with the results which are got from the mechanical extensometer. In addition,a series of virtual transverse extensometers are added at different locations of the sample by the DIC method to analyze the influence of the measuring positions of transverse strain on the measurement of r-value. The experimental results show that the stability of the DIC method is better than that of the mechanical extensometer. Different measuring positions of the virtual transverse extensometer lead to different experimental results,and the farther the measuring position away from the fracture location,the bigger the result error is. While,the DIC method can ensure the accuracy of the measuring position and results.
出处
《物理测试》
CAS
2017年第4期27-32,共6页
Physics Examination and Testing
基金
国家重大科学仪器设备开发专项资助项目(2012YQ03007503)
关键词
数字图像相关方法
IF钢
n值
r值
测量位置
digital image correlation method
IF steel
n-value
r-value
measuring position