干式防渗料在190kA大型预焙槽上的应用
被引量:1
摘要
在电解槽阴极内衬破损中电解质渗透是重要原因 ,而干式防渗料可有效阻止电解质渗透 ,在电解槽上应用后 ,起到了降低炉底压降、提高电流效率、减缓炉底隆起及槽壳变形的效果 。
出处
《轻金属》
CSCD
北大核心
2002年第8期47-48,共2页
Light Metals
同被引文献17
-
1廖贤安,姚世焕,韦涵光.采用优质阴极碳块开发大型高效节能长寿铝电解槽[J].轻金属,2006(1):34-36. 被引量:5
-
2Tabereaux A T. Reviewing advances in cathode refractory materials [ J]. JOM, 1992, 44( 11 ) : 20- 26.
-
3Weibel R, Juhl L F, Nielsen B, et al. Aging of refractory pot lining materials in aluminum electrolysis cells [ C ]// Eleventh International Aluminum Symposium. Trondheim-Bergen-Trondheim, Norway, 2001 : 65 -79.
-
4Liao X A, Harald A, φye. Effects of carbon-coating on sodium expansion of the cathode in aluminum electrolysis [ J]. Light Metals, 1999 : 629 - 636.
-
5Dell M B. Reaction between carbon lining and hall bath [J]. Extractive Metallurgy of Aluminum, 1963, 2:403 -416.
-
6Waddington J. Process occuring in the carbon lining of an aluminum reduction cell [ J]. Extractive Metallurgy of Aluminum, 1963, 2:435 -452.
-
7Langon B, Varin P. Aluminum peehiney 280kA pots [J]. Light Metals, 1986:343 -347.
-
8Lakomsky V I. Electric resistance at the contact between metal and carbon bottom block in an aluminum reduction cell [ J]. Svetnye Metally, 1993, ( 5 ) : 29 - 33.
-
9Haupin W E. Cathode voltage loss in aluminum smelting cells [ J]. Light Metals, 1975:339 -349.
-
10Morten Sorlle, Hermann Gran. Cathode collector bar-carbon contact resistance [ J]. Light Metalls, 1992:779 -787.
二级引证文献7
-
1崔香菊,田振明,李娜,张敬东.大型预焙阳极电解槽延长槽寿命的实践[J].轻金属,2010(7):38-40. 被引量:2
-
2高翔.氮化硅结合碳化硅铝电解槽侧壁材料的应用及抗侵蚀性研究现状[J].金属材料与冶金工程,2010,38(5):54-57. 被引量:3
-
3王运江,王世明,温铁军,郭捷,赵一峰,陈永康.新型纳米孔节能材料在300kA电解槽上的应用[J].轻金属,2012(4):38-40. 被引量:5
-
4李勇,刘升,王有来,秦卫中,张树东,李炜煜.全保温型内衬配置在300kA铝电解槽上的应用[J].有色金属(冶炼部分),2012(10):20-22. 被引量:8
-
5茹红强,赵宝玉,李磊,龙海波.免烧成硼酸铝-碳化硅耐火材料的性能[J].东北大学学报(自然科学版),2013,34(4):516-519.
-
6郎学春,李贤.保温型内衬结构在240kA铝电解槽上的应用[J].有色冶金节能,2014,30(4):23-25. 被引量:2
-
7李剑.对我国铝电解槽内衬结构优化技术现状及发展趋势概论[J].科学与信息化,2017,0(27):44-45.
-
1张文通,魏太林.高炉热风管道内衬破损的修复措施[J].冶金动力,1998(3):53-54.
-
2朱骏,薛济来,李想,王维,陈通.电解质渗透对铝电解石墨质阴极材料高温导电性的影响[J].有色金属(冶炼部分),2014(4):18-21. 被引量:2
-
3刘海石.大型预焙槽的槽底隆起问题[J].轻金属,1990(11):26-29.
-
4王海.铝电解槽内衬破损原因分析及对策[J].甘肃科技,2011,27(18):85-86. 被引量:3
-
5牛新国.电解槽槽壳变形的原因及预防[J].中国设备工程,2004(1):38-38.
-
6李西朝,路平,元贵生,朱咏梅.延长混铁炉炉龄的探索与实践[J].河南冶金,1999(5):26-28. 被引量:1
-
7曾健,朱剑东.240kA预焙槽早期内衬破损的原因及对策[J].有色金属(冶炼部分),2004(4):16-19. 被引量:1
-
8阎锋.国产保温防渗料在60kA自焙铝电解槽上应用试验研究[J].有色矿冶,2001,17(4):33-35. 被引量:5
-
9谢毅.电解槽内衬结构对寿命的影响[J].经营管理者,2009(20):360-360.
-
10张俊科,王令丰,张万福.电解槽槽壳变形的预防[J].轻金属,2013(6):41-43. 被引量:2