摘要
文章通过研究三角形凸台全傳接板式换热器的换热性能及阻力性能探究了板式换热器性能的数值模拟方法,文章具有一定的实用性和参考价值。
出处
《科技风》
2017年第19期198-198,共1页
二级参考文献14
-
1YILMAZ M,SARA ON,KARSL S.Performance evalua-tion criteria for heat exchangers based on second law anal-ysis[J].Exergy Int J,2001,1(4):278-294.
-
2BEJAN A.Entropy generation through heat and fluid flow[M].New York:Wiley,1982.
-
3BEJAN A.Entropy generation minimization[M].NewYork:CRC Press,1995.
-
4BEJAN A.A study of entropy generation in fundamentalcontrol system[J].Trans ASME J Heat Transfer,1979(101):718-725.
-
5VARGAS JVC,BEJAN A,SIEMS DL.Integrative ther-modynamic optimization of the cross flow heat exchangerfor an aircraft environmental control system[J].TransASME,2001(123):760-769.
-
6TUGRUL R Ogulata,FSUN Doba,TUNCAY Yilmaz.Irreversibility analysis of cross flow heat exchangers[J].Entropy Converts Manage,2000(41):1585-1599.
-
7DUMUS A,BENLI H,KURTBAS I,et al.Investigationof heat transfer and pressure drop in plate heat exchangershaving different surface profiles[J].Int J Heat MassTransfer,2009(52):1451-1457.
-
8WESSELING P.Principles of computational fluid dynam-ics[M].Berlin:Springer,2001:9-21.
-
9MULEY A.Heat transfer and pressure drop in plate heatexchangers[D].Cincinnati:University of Cincinnati,1997.
-
10GUO J F,XU M T,CHENG L.The application of fieldsynergy number in shell-and-tube heat exchanger optimi-zation design[J].Appl Energ,2009(86):2079-2087.
共引文献9
-
1张栋博,段明哲,张志刚,张晶.板式换热器优化设计方法综述[J].化学工程与装备,2015(6):217-219. 被引量:4
-
2欧兰军,李治国,王森.三种板片结构热交换器的传热性能及流动阻力性能的数值模拟分析[J].中国化工装备,2016,18(1):10-14.
-
3卢沛,罗向龙,陈健勇,杨智,梁颖宗,陈颖.板式换热器及其热力系统的运行特性和高级[火用]分析[J].化工学报,2021,72(S01):512-519. 被引量:3
-
4张元吉,李治国,张涛.卡丽娜(Kalina)循环系统蒸发器入口结构流场数值模拟分析[J].机械研究与应用,2021,34(6):48-51. 被引量:1
-
5姚立影,马金伟,马一鸣,陈晶,高杰,张向南.基于计算流体力学数值模拟的板式热交换器传热与流动分析[J].石油化工设备,2022,51(1):29-33.
-
6郭一楠,蒋东章,王瑞茹,巩敦卫.宽通道换热板片结构的多目标头脑风暴优化设计[J].控制与决策,2022,37(9):2314-2322.
-
7房立伟,焦守一,房立帅,刘帅.气气正弦波纹板式换热器模拟研究[J].山东化工,2023,52(11):218-221.
-
8任守红,董美华.超高层建筑中板式换热器的性能分析[J].节能,2024,43(2):10-13.
-
9聂泽森,毕勤成,高彬.新型板式换热器的传热与流动特性[J].工程热物理学报,2014,35(10):2041-2044. 被引量:4
二级引证文献9
-
1司少锋.煤矿40 t刮板输送机安装技术研究[J].机械管理开发,2020,35(8):174-175.
-
2梁卫兵.刮板输送机刮板链张力监测系统的研究[J].机械管理开发,2020,35(10):260-262. 被引量:5
-
3徐乐.全封闭防尘防护装置在刮板输送机中的应用分析[J].机械管理开发,2021,36(2):137-138.
-
4谢婷.刮板输送机传动装置的优化改造研究[J].当代化工研究,2022(10):162-164. 被引量:1
-
5盛松梅.矿用刮板输送机变频驱动优化设计与应用研究[J].能源与环保,2022,44(6):237-242. 被引量:5
-
6白榕,刘文伟.PLC控制器在刮板输送机监测系统中的应用分析[J].能源与环保,2022,44(11):209-213.
-
7范石磊.刮板输送机卡链故障原因分析及改进[J].矿业装备,2023(2):180-182.
-
8张宇,白成耀.基于CANopen协议的刮板输送机功率协调控制系统研究[J].能源与环保,2023,45(7):239-243. 被引量:2
-
9曾南,杜双利.矿用刮板输送机状态监测系统设计及其实现研究[J].能源与环保,2023,45(8):207-212. 被引量:1
-
1侯文义,杨晓虎.板式换热器[J].金属世界,1992(5):15-15.
-
2侯隆月.板式换热器维护保养研究[J].中国房地产业,2017,0(16):252-252.
-
3陈志强,何宏舟,赵龙飞,陈孟龙.高效海水换热器的设计和模拟分析[J].能源与环境,2017(4):5-6. 被引量:1
-
4林涛.混合蒸汽在板式换热器中凝结换热特征探析[J].现代国企研究,2017(4).
-
5潘晓辉.新疆S316线尼勒克-新源公路加朗普特滑坡稳定性分析[J].新疆交通运输科技,2017,0(5):35-37.
-
6Weishuang LU,Yun TIAN,Peiqing LIU.Aerodynamic optimization and mechanism design of flexible variable camber trailing-edge flap[J].Chinese Journal of Aeronautics,2017,30(3):988-1003. 被引量:12
-
7王韬.受井采影响排土场边坡失稳破坏机理数值模拟研究[J].露天采矿技术,2017,32(8):10-13. 被引量:1
-
8王茜,韩怀志,李炳熙.板式换热器波纹通道的流动与传热机理[J].化工学报,2017,68(S1):71-82. 被引量:15
-
9郝佳顺.某矿动力灾害产生机理及防控措施[J].现代矿业,2017,33(7):247-251.
-
10周国梁,苏林,吴龙兵,黄俊锋.变工况条件下微通道蒸发器换热特性实验研究[J].制冷学报,2017,38(4):87-93. 被引量:14