期刊文献+

活性射流作用钢靶侵彻爆炸联合毁伤效应 被引量:13

Penetration and Blast Combined Damage Effects of Reactive Material Jet Against Steel Target
下载PDF
导出
摘要 采用静爆实验和理论分析相结合的方法,对活性射流作用钢靶侵彻爆炸联合毁伤效应进行了研究.实验结果表明,与金属射流相比,侵彻深度显著减小,但活性射流侵彻钢靶形成的侵孔直径更大,并伴随有更强的爆裂毁伤效应.基于金属射流准定常破甲理论和伯努利修正方程,引入活性材料弛豫时间参数,建立了活性射流作用钢靶侵爆毁伤效应分析模型,从机理上解释了活性射流对钢靶的毁伤行为及效应. The damage effects of reactive material jet against steel targets were researched by the combination of static explosive experiments and theoretical analysis.The experimental results show that,compared with the traditional metal jet,the diameter of the penetration hole formed by reactive material jet in steel targets was much larger together with stronger blast-induced crack effects,while the penetration depth shows a significant decrease.Based on the quasi-steady incompressible fluid theory and modified Bernoulli equation,a theoretical model for analyzing the penetration and blast combined damage effects was developed to consider the self-delay imitation time of reactive material jet.As such,a theoretical explanation from the perspective of damage mechanism about the combined damage effects was presented by this analytical model.
出处 《北京理工大学学报》 EI CAS CSCD 北大核心 2017年第8期789-793,800,共6页 Transactions of Beijing Institute of Technology
关键词 聚能装药 活性药型罩 活性射流 侵爆联合 毁伤效应 shaped charge reactive material liner reactive material jet penetration and blast combined damage effects
  • 相关文献

参考文献2

二级参考文献17

  • 1北京工业学院八系.爆炸及其作用[M].北京:国防工业出版社,1979..
  • 2Ames R G. Energy release characteristics of impact initiated energetic materials [ C] // Proceedings of Materials Research Society Symposium. Boston: Materials Research Society, 2006 : 78 - 83.
  • 3Ames R G. Vented chamber calorimetry for impact initiated energetic materials, AIAA 2005 - 279 [R]. Reno, Nevada: [s. n. ], 2005.
  • 4Cai J, Walley S M, Hunt R J A, et al. High-strain, high-strain-rate flow and failure in PTFE/Al/W granular composites [J]. Material Science Engineering A, 2008,472..308 - 315.
  • 5Wang Haifu, Liu Zongwei, Yu Weimin. Impact initiated characteristics of reactive material fragments [C] // Proceedings of 7th International Fall Seminar on Propellants, Explosives and Pyrotechnics. Xi'an.. National Natural Science Foundation of China, 2007:123 - 128.
  • 6Willis M J, William H H. Impact initiation of rods of pressed polytetrafluoroethylene (PTFE) and aluminum powders [C] // Proceedings of 14th APS Topical Conference on Shock Compression of Condensed Matter. Los Angeles.. American Physical Society, 2005: 98 - 103.
  • 7Raftenberg M N, Mock Jr, Kirby G C. Modeling the impact deformation of rods of a pressed PTFE/AI composite mixture[J].International Journal of Impact Engineering, 2008,35 : 1735 - 1744.
  • 8Wang Haifu, Liu Zongwei, Yu Weimin. Impact initiated characteristics of reactive material fragments [C] // Proceedings of 7th International Fall Seminar on Propellants, Explosives and Pyrotechnics. Xi'an: National Natural Science Foundation of China, 2007: 123 - 128.
  • 9Ames R G. Energy release characteristics of impact-initiated energetic materials [ C ] // Proceedings of Materials Research Society Symposium. Boston Materials Research Society, 2006: 78 - 83.
  • 10Willis M J, William H H. Impact initiation of rods of pressed polytetrafluoroethylene (PTFE) and aluminum powders [C] // Proceedings of 14th APS Topical Conference on Shock Compression of Condensed Matter. Los Angeles: American Physical Society, 2005: 98- 103.

共引文献32

同被引文献69

引证文献13

二级引证文献57

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部