期刊文献+

脉冲激光沉积低内应力多层类金刚石膜 被引量:1

Multilayer-DLC film with low inner-stress prepared by pulsed laser deposition
下载PDF
导出
摘要 为解决类金刚石膜内应力极大的问题,利用很薄的岛状结构锗层与较厚的类金刚石层循环,设计并制备了具有低内应力的多层类金刚石膜。其中,类金刚石层为主要功能膜层,起到硬质保护和光学增透的作用;而锗层作为缓冲层,起到缓解纯类金刚石膜内应力过大的问题,同时由于锗层很薄,对整个膜层的机械性能和红外特性的影响很小。测试表明,制备的多层类金刚石膜内应力为2.14 GPa,比纯类金刚石膜降低了39%,通过了GJB2485-95《光学膜层通用规范》中的重摩擦测试;同时,其纳米硬度仍保持在47 GPa的高水平。该多层类金刚石膜可以作为实际应用的红外窗口保护膜。 Multilayers diamond-like carbon film, which was composed of several thick diamond-like carbon layers and thin germanium island layers, was prepared on the germanium substrate in order to resolve the high inner-stress in the diamond-like carbon film. The diamond-like carbon layers had the main function of protection, and the germanium island layers had the buffer function to reduce the inner-stress in the diamond-like carbon film. Meanwhile, the thicknesses of the germanium layers were very thin, so they had no influence on the mechanical and infrared performances of the whole film nearly. Inner-stress in the multilayers diamond-like carbon film was 2.14 GPa, 39% lower than that of the pure diamond-like carbon film, and the multilayers diamond-like carbon film could pass the friction test stipulated in the GJB2485-95'general specification for optical coatings. The hardness of the multilayers diamond-like carbon kept high hardness of 47 GPa, and had the same surface roughness to the pure diamond-like carbon film. Therefore, the multilayers diamond-like carbon film could be used as practical protective film for infrared window.
出处 《红外与激光工程》 EI CSCD 北大核心 2017年第9期275-280,共6页 Infrared and Laser Engineering
基金 国家部委预先研究项目(51318060212)
关键词 脉冲激光沉积 多层类金刚石膜 锗缓冲层 低内应力 pulsed laser deposition multilayers diamond-like carbon film germanium buffer layers low inner-stress
  • 相关文献

参考文献10

二级参考文献144

共引文献33

同被引文献6

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部