期刊文献+

金鑫钼矿石高压辊磨破碎产品的特性研究 被引量:2

Study on Characteristics of Products Crushed by High Pressure Grinding Rolls of Molybdenum Ore from Jinxin
下载PDF
导出
摘要 为了解高压辊磨破碎对赤峰金鑫钼矿石辊压产品粒度性能的影响,将其与颚式破碎产品进行了粒度分布特性和Bond球磨功指数对比研究,并对表面微裂纹进行了观察、比较。结果表明:(1)高压辊磨破碎粒度为20~0mm的试样,产品的粒度较颚式破碎产品细;辊面压力越大,产品的粒度越细;高压辊磨机工作压力越大,粒度均匀程度越高,且均高于颚式破碎产品。(2)适当提高辊面速度,有利于改善辊磨产品粒度分布的均匀性。(3)高压辊磨产品(3.2~0 mm)的Bond球磨功指数(目标粒度-0.074 mm)比颚式破碎产品(3.2~0 mm)低10.96%。(4)高压辊磨产品表面的微裂纹比颚式破碎产品多,这正是高压辊磨产品磨矿能耗较低的重要原因。 In order to understand the influence of the grain size properties of Jinxin molybdenum ore in Chifeng crushed by high pressure grinding rolls( HPGR),its size distribution characteristics and bond work index of ball mill were studied and compared with the product of the jaw crusher,and the surface micro cracks were observed and compared. The results show that:(1)For the samples with the crushing size of HPGR 20 ~ 0 mm or below,the size of the product is finer than that of the jaw crusher( JC). The bigger the roll surface pressure,the finer the grain size of the product; The higher working pressure of HPGR,the higher uniformity of the particle size. All index are higher than that of JC.(2)Improving the roller surface speed is beneficial to improve the uniformity of size distribution.(3)the bond work index of ball mill( target particle size-0. 074 mm)of HPGR products( 3. 2 ~ 0 mm) is 10. 96% lower than that of JC( 3. 2 ~ 0 mm).(4) The micro-cracks on the surface of HPGR products are more than that of JC,which is the important reason for the low energy consumption of HPGR.
出处 《金属矿山》 CAS 北大核心 2017年第9期126-129,共4页 Metal Mine
关键词 高压辊磨机 粒度分布特性 Bond球磨功指数 微裂纹 High pressure grinding rolls Size distribution characteristics Bond work index of ball mill Micro-crack
  • 相关文献

参考文献3

二级参考文献40

  • 1PATERSON S M, WONG T F. Evolution of physical properties during brittle failure, in experimental rock deformation--the brittle field[M]. 2nded. Berlin: Springer, 2005: 59- 114.
  • 2TAPPONNIER P, BRACE W E Development of stress-induced microcracks in Westerly granite[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 1976, 13(1): 103 - 112.
  • 3WONG T F. Micromechanics of faulting in Westerly granite[J]. International Journal of Rock Mechanics and Mining Sciences and GeomechanicsAbstracts, 1982, 19(2): 49-64.
  • 4LOCKNER D. The role of acoustic emission in the study of rock fracture[J]. International Journal of Rock Mechanics and Mining Sciences and GeomechanicsAbstracts, 1993, 30(7): 883 - 899.
  • 5LOCKNER D A, BYERLEE J D. Fault growth and acoustic emissions in confined granite[J]. Applied Mechanics Reviews, 1992, 45(2/3): 165 - 173.
  • 6SUGAWARA K, KOJIMA R, OBARA Y, et al. Crack opening analysis by means of the X-ray CT[J]. Journal of Mining and MineralProcessing Institute of Japan, 1998, 114(11): 881 - 887.
  • 7SATO A, FUKAHORI D, SAWADA A, et al. Evaluation of crack opening in the heterogeneous materials by X-ray CT[J]. Journal of Mining and Mineral Processing Institute of Japan, 2004, 120(6/7): 365 - 371.
  • 8NISHIYAMA T, KUSUDA H. Identification of pore spaces and microcracks using fluorescent resins[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 1994, 31(4): 369- 375.
  • 9KUSUDA H, NISHIYAMA T. Extraction and evaluation of microcracks in rocks by methods of image processing[J]. Journal of the Japan Society of Engineering Geology, 1994, 34(6): 292 - 299.
  • 10CHEN Y, NISHIYAMA T, KUSUDA H, et al. Correlation between microcrack distribution patterns and granitic rock splitting planes[J]. International Journal of Rock Mechanics and Mining Sciences, 1999, 36(4): 535 - 541.

共引文献51

同被引文献32

引证文献2

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部