期刊文献+

基于SPPARKS的三维晶粒长大动力学蒙特卡罗模拟 被引量:2

Kinetic Monte Carlo simulation of 3D grain growth based on SPPARKS
下载PDF
导出
摘要 为了对晶粒长大动力学理论方程进行验证,采用SPPARKS和动力学蒙特卡罗算法对于大尺度三维多晶组织的演变进行了模拟,研究了模型温度对晶粒长大过程中多晶组织演变的影响,对于晶粒长大过程中晶粒尺寸的变化以及尺寸分布情况进行了统计分析,并讨论了模型尺寸的影响。结果表明晶粒长大动力学关系符合抛物线规律,尺寸分布采用Weibull函数进行描述更精确,模型尺寸越大,获得的晶粒长大动力学和尺寸分布就越精确。 In order to verify the theoretical equation of grain - growth kinetics, the evolution of 3 D large - scale polycrystalline structure were simulated using Kinetic Monte Carlo algorithms based on SPPARKS. The effects of model temperature on the evolution of microstructure during grain growth were studied. Changes of grain size and its distribution in grain growth process were analyzed statistically, and the influence of model size is discussed. The results show that the grain - growth kinetics is in accordance with the parabolic law, and the size distribution can be described by Weibull function accurately. The larger the model size is, the more accurate the grain growth kinetics and size distribution are.
出处 《中国体视学与图像分析》 2017年第2期145-150,共6页 Chinese Journal of Stereology and Image Analysis
基金 国家自然科学基金(51271089) 佳木斯大学研究生科技创新项目(LZZ2015_006)
关键词 三维晶粒长大 晶粒长大动力学 晶粒尺寸分布 动力学蒙特卡罗 3D grain growth Grain- growth kinetics Grain size distribution Kinetic Monte Carlo
  • 相关文献

参考文献5

二级参考文献38

  • 1王超,刘国权,于海波.基于晶粒长大拓扑依赖性的准稳态三维晶粒尺寸分布[J].金属学报,2004,40(12):1233-1237. 被引量:4
  • 2于海波,刘国权.一种三维个体晶粒长大理论模型[J].科学通报,1996,41(21):2000-2003. 被引量:10
  • 3刘国权 张禹 秦湘阁 等.材料显微组织三维观测与基于图像的模型研究[J].中国体视学与图像分析,2001,6:46-46.
  • 4余永宁 刘国权 体视学.组织定量分析的原理和应用[M].北京:冶金工业出版社,1998..
  • 5马小亮.中压变频调速方案[A]..中国电工技术学会水工业电工专业委员会第一界会议论文集[C].苏州,1999..
  • 6Srolovitz D J, Anderson M P, Sahni P S et al. Acta Metall [J], 1984, 32(5): 793
  • 7Radhakrishnan B, Zacharia T. Metall Mater Trans [J], 1995, 26A(1): 167
  • 8Song X Y, Liu G Q. Scr Mater [J], 1998, 38:1691
  • 9Liu G, Yu H, Song X et al. Mater Des [J], 2001, 22:33
  • 10Song X Y, Liu G Q. J Mater Sci Technol [J], 1998, 14:506

共引文献24

同被引文献17

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部