期刊文献+

BFRP锚杆与钢筋锚杆现场拉拔试验对比分析 被引量:2

Comparative Analysis on Field Pullout Test of BFRP anchor Bolt and Steel Bolts
下载PDF
导出
摘要 通过BFRP锚杆的现场拉拔试验,测试BFRP锚杆的抗拔极限承载力,并与钢筋锚杆对比,研究BFRP锚杆的锚固性能。根据试验数据分析BFRP锚杆的平均单根极限抗拔力和极限抗拉强度。结果表明:6根?14BFRP锚杆极限抗拔力与3根?28 HRB400钢筋锚杆极限抗拔力相当。多束BFRP筋组成锚杆时,平均单筋极限抗拔力约为BFRP筋极限抗拔力的80%。 By field pull-out test, the pullout ultimate bearing capacity of BFRP anchor bolt was tested, and then its anchorage performance was studied by the comparison with steel bolt; depending on the test data, the average single ultimate pullout resistance and ultimate tensile strength of BFRP anchor bolt were analyzed. The result shows that six Ф14 BFRP anchor bolts have the equivalent ultimate pullout resistance to three Ф28 HRB400 steel bolts and, in case of the bolt made of BFRP bars, the average ultimate pullout resistance of single bar is about 80 % of that of the BFRP bars.
出处 《路基工程》 2017年第5期86-89,共4页 Subgrade Engineering
基金 广东省交通运输厅科技项目(科技-2013-02-012)
关键词 BFRP筋材 锚杆 拉拔试验 抗拉强度 弹性模量 BFRP anchor bolt pull-out test tensile strength elasticity modulus
  • 相关文献

参考文献10

二级参考文献68

共引文献269

同被引文献30

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部