期刊文献+

高压氢气对6061铝合金力学性能的影响 被引量:11

Effects of High Pressure Hydrogen on Mechanical Properties of 6061 Aluminum Alloy
下载PDF
导出
摘要 6061铝合金是铝内胆、碳纤维、全缠绕气瓶的重要原材料,其氢气相容性直接影响气瓶的安全可靠性,但目前缺少国产6061铝合金的氢气相容性数据。为研究高压氢气对国产6061铝合金力学性能的影响,选取2种热处理工艺的国产6061铝合金在高压氢气环境下进行慢应变速率拉伸试验和疲劳裂纹扩展试验。试验结果表明,国产6061铝合金具有良好的氢气相容性,氢气对慢应变速率拉伸性能和疲劳裂纹扩展性能的影响均较小。同时,热处理工艺对6061铝合金氢脆敏感性无明显影响。 The 6061 aluminum alloy is an important raw material for aluminum liner carbon fiber full-wrapped composite gas cylinders,whose hydrogen compatibility determines to a great degree the safety and reliability of gas cylinders.However,the data is lacking in China concerning its hydrogen compatibility.In order to investigate the effects of high pressure hydrogen on the mechanical properties of the domestically fabricated6061 aluminum alloy,the slow strain rate tests and fatigue crack growth rate tests for it were carried out under two heat treatment conditions.The test results show that the 6061 aluminum alloy has good compatibility with hydrogen,and hydrogen has little effect on its slow strain rate tensile properties and fatigue crack growth properties.Meanwhile,it was also found that heat treatment has little influence on its hydrogen embrittlement sensitivity.
出处 《高压物理学报》 CSCD 北大核心 2017年第5期505-510,共6页 Chinese Journal of High Pressure Physics
基金 国家重点基础研究发展计划(2015CB057601)
关键词 6061铝合金 力学性能 高压氢气 热处理工艺 6061 aluminum alloy mechanical property high pressure hydrogen ~ heat treatment
  • 相关文献

参考文献1

二级参考文献6

  • 1PIKETT A K, PYTTEL T, PAYEN F. Failure prediction for advanced crashworthiness of transportation vehicles [J]. International Journal of Impact Engineering, 2004, 30: 853-872.
  • 2ZHOU H J. Strength of metal materials[M]. Beijing: Science Press, 1989.
  • 3BATRA R C, LEAR M H. Adiabatic shear banding in plane strain tensile deformations of thermoelastovi- scoplastic materials with finite thermal wave speed[J]. International Journal of Plasticity, 2005, 21 : 1 521-1545.
  • 4WARREN T L, FORRESTAL M J. Effect of strain hardening and strain-rate sensitivity on the penetration of aluminum targets with spherical-nosed rods[J]. Int. J. Solid Structures, 1998, 35:3 737-3 753.
  • 5SCHMITT W, SUN D Z, BLAUEL J G. Damage mechanics analysis (Gurson model) and experimental verification of the behaviors of a crack in a weld-cladded[J]. Nuclear Engineering and Design, 1997, 174- 237-246.
  • 6AGARWAL H, GOKHALE A M, GRAHAM S, et al. Void growth in AA6061-aluminum alloy under triaxials stress state[J]. Materials Science and Engineering, 2003, A341 : 35-42.

共引文献32

同被引文献73

引证文献11

二级引证文献42

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部