期刊文献+

气相流约束调控微细水射流的数值仿真 被引量:1

Numerical Simulation of High Pressure Micro Water Jet Modulation with the Constraint of Gas Flow
下载PDF
导出
摘要 针对高压微细水射流的喷嘴磨损严重和分辨率很难进一步提高的问题,给出了一种新的射流方案,即气相流约束调控下的微细水射流。通过数值模拟的方法,对该射流方案的射流过程进行研究,并得到了气相流约束下微细水射流的流场分布。研究结果表明,该射流方案是可行的,能有效地减小射流喷嘴的磨损,以及进一步提高微细水射流的分辨率。 The high pressure micro water jet nozzle is often seriously worn and its resolution is difficult to further improve.To address this problem,a new method of the micro water jet under the constraint of the gas flow was presented in this paper.Using numerical simulation,the process of the jet was explored and the flow field distribution of the micro water jet under the constraint of the gas flow was obtained.The results show that the scheme proposed was feasible,capable of reducing effectively the wearing of the jet nozzle and improving its resolution.
出处 《高压物理学报》 CSCD 北大核心 2017年第5期585-592,共8页 Chinese Journal of High Pressure Physics
基金 宁波市自然科学基金(2015A610095 2015A610106)
关键词 高压微细水射流 气相流约束 数值模拟 喷嘴磨损 high pressure micro water jet constraint of gas flow numerical simulation wear of thejet nozzle
  • 相关文献

参考文献6

二级参考文献54

  • 1贾明峰,俞涛,方明伦,林金生.磨料水射流数控机床的研究与开发[J].机械工程师,2001(4):18-20. 被引量:7
  • 2刘忠伟,邓英剑.水喷射加工技术及其在机械领域中的应用[J].制造技术与机床,2004(2):37-40. 被引量:12
  • 3[2]A W Momber,R Kovacevic.Principles of abrasive water jet machining[M].Springer-verlag,London,Appears,1998.
  • 4[6]韩占忠,王敬,兰小平.FLUENT流体工程仿真计算实例与应用[M].北京:北京理工大学出版社,2006.
  • 5Osman A H, Mabrouki T,Thery B,et al. Experimental Analysis of High-Speed Air Water Jet Flow in an Abrasive Water Jet Mixing Tube [J]. Flow Meas Instrum,2004,15(1) :37-48.
  • 6J unkar M, J urisevic B, Fajdiga M, et al. Finite Element Analysis of Single Particle Impact in Abrasive Water Jet Machining [J]. Int J Impact Eng,2006,32(7):1095-1112.
  • 7Vikram G, Ramesh B N. Modelling and Analysis of Abrasive Water Jet Cut Surface Topography [J]. Int J Mach Tool Manuf,2002,42(12) :1345-1354.
  • 8Palleda M. A Study of Taper Angles and Material Removal Rates of Drilled Holes in the Abrasive Water Jet Machining Process [J].J Mater Process Technol,2007,189(1-3):292-295.
  • 9Hou R G, Huang C Z,Wang J ,et al. Simulation of Velocity Field of Two Phase Flow for Gas and Liquid in the Abrasive Water Jet Nozzle [J]. Key Eng Mater,2006,315-316:150-153.
  • 10Hou R G, Huang C Z,Wang J, et al. Simulation of Solid-Liquid Two-Phase Flow Inside and Outside the Abrasive Water Jet Nozzle [J]. Key Eng Mater, 2007,339 : 453-457.

共引文献91

同被引文献5

引证文献1

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部