摘要
分别应用ANSYS经典模式和Workbench模式对具体算例进行有限元分析,分析两种模式下子模型的技术操作特点,并比较子模型的优缺点和计算精度。通过研究得出,基于ANSYS经典模式的子模型,其技术操作相对复杂,但适用范围广;而基于Workbench模式的子模型,其技术操作简单,且适用性较好。
ANSYS classical mode and Workbench mode were applied to finite element analysis of the specific examples, the technical operation characteristics of the sub-mode under the two modes were analyzed while the advantages and disadvantages as well as the calculation accuracy of the sub-modes were compared. It is concluded through study that the sub-mode based on ANSYS classical mode is relatively complicated in its technical operation, but its scope of application is wide. The sub-mode based on the Workbench mode has the advantages of simple operation and good applicability.
出处
《机械制造》
2017年第10期32-35,共4页
Machinery
关键词
计算机
模型
有限元
应用
Computer Model Finite Element Application
