期刊文献+

Preparation and Characterization of CA-MA Eutectic/Silicon Dioxide Nanoscale Composite Phase Change Material from Water Glass via Sol-Gel Method

Preparation and Characterization of CA-MA Eutectic/Silicon Dioxide Nanoscale Composite Phase Change Material from Water Glass via Sol-Gel Method
下载PDF
导出
摘要 This work mainly involved the preparation of a nano-scale form-stable phase change material(PCM) consisting of capric and myristic acid(CA-MA) binary eutectic acting as thermal absorbing material and nano silicon dioxide(nano-SiO_2) serving as the supporting material. Industrial water glass for preparation of the nano silicon dioxide matrix and CA-MA eutectic mixture were compounded by single-step sol-gel method with the silane coupling agent. The morphology, chemical characterization and form stability property of the composite PCM were investigated by transmission electron microscopy(TEM), scanning electron microscopy(SEM), Fourier-transform infrared(FT-IR) spectroscopy and polarizing microscopy(POM). It was indicated that the average diameter of the composite PCM particle ranged from 30-100 nm. The CA-MA eutectic was immobilized in the network pores constructed by the Si-O bonds so that the composite PCM was allowed no liquid leakage above the melting temperature of the CA-MA eutectic. Differential scanning calorimetry(DSC) and thermogravimetric analysis(TGA) measurement were conducted to investigate the thermal properties and stability of the composite PCM. From the measurement results, the mass fraction of the CA-MA eutectic in the composite PCM was about 40%. The phase change temperature and latent heat of the composite were determined to be 21.15 ℃ and 55.67 J/g, respectively. Meanwhile, thermal conductivity of the composite was measured to be 0.208 W·m^(-1)·K^(-1) by using the transient hot-wire method. The composite PCM was able to maintain the surrounding temperature close to its phase change temperature and behaved well in thermalregulated performance which was verified by the heat storage-release experiment. This kind of form-stable PCM was supposed to complete thermal insulation even temperature regulation by the dual effect of relatively low thermal conductivity and phase change thermal storage-release properties. So it can be formulated that the nanoscale CA-MA/SiO_2 composite PCM with the form-stable property, good thermal storage capacity and relatively low thermal conductivity can be applied for energy conservation as a kind of thermal functional material. This work mainly involved the preparation of a nano-scale form-stable phase change material(PCM) consisting of capric and myristic acid(CA-MA) binary eutectic acting as thermal absorbing material and nano silicon dioxide(nano-SiO_2) serving as the supporting material. Industrial water glass for preparation of the nano silicon dioxide matrix and CA-MA eutectic mixture were compounded by single-step sol-gel method with the silane coupling agent. The morphology, chemical characterization and form stability property of the composite PCM were investigated by transmission electron microscopy(TEM), scanning electron microscopy(SEM), Fourier-transform infrared(FT-IR) spectroscopy and polarizing microscopy(POM). It was indicated that the average diameter of the composite PCM particle ranged from 30-100 nm. The CA-MA eutectic was immobilized in the network pores constructed by the Si-O bonds so that the composite PCM was allowed no liquid leakage above the melting temperature of the CA-MA eutectic. Differential scanning calorimetry(DSC) and thermogravimetric analysis(TGA) measurement were conducted to investigate the thermal properties and stability of the composite PCM. From the measurement results, the mass fraction of the CA-MA eutectic in the composite PCM was about 40%. The phase change temperature and latent heat of the composite were determined to be 21.15 ℃ and 55.67 J/g, respectively. Meanwhile, thermal conductivity of the composite was measured to be 0.208 W·m^(-1)·K^(-1) by using the transient hot-wire method. The composite PCM was able to maintain the surrounding temperature close to its phase change temperature and behaved well in thermalregulated performance which was verified by the heat storage-release experiment. This kind of form-stable PCM was supposed to complete thermal insulation even temperature regulation by the dual effect of relatively low thermal conductivity and phase change thermal storage-release properties. So it can be formulated that the nanoscale CA-MA/SiO_2 composite PCM with the form-stable property, good thermal storage capacity and relatively low thermal conductivity can be applied for energy conservation as a kind of thermal functional material.
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2017年第5期1048-1056,共9页 武汉理工大学学报(材料科学英文版)
基金 Funded by the National Natural Science Foundation of China(No.51308275) Natural Science Foundation of Liaoning Province(No.SY2016004) the Colleges and Universities Excellent Talents Supporting Plan Program of Liaoning Province(No.LJQ2015049)
关键词 fatty acid eutectic silicon dioxide nanoscale composite phase change material water glass sol-gel fatty acid eutectic silicon dioxide nanoscale composite phase change material water glass sol-gel
  • 相关文献

参考文献3

二级参考文献17

  • 1丁剑红,张寅平,王馨,杨睿,林坤平.掺杂对定形相变材料导热系数的影响[J].太阳能学报,2005,26(6):853-856. 被引量:20
  • 2林怡辉 张正国 王世平.新型复合相变储热材料的研究[A]..2000年中国材料研讨会论文摘要集(上)[C].北京,2000-11.194-195.
  • 3Feldman D, Shapira M M, Bang D,et al. [J]. Solar Energy Materials, 1989,18 : 201-216.
  • 4Hawes D W,Banu D, Feldman D. [J]. Solar Energy Materials, 1989, 19:335-348.
  • 5Holman Mark E. Gel-coated Microcapsules [P]. US: 6099894,2000-08-08.
  • 6Salyer I O. Dry powder mixes comprising phase change materials [P]. US 5370814, 1994.
  • 7Feldman D, Shapiro M M, Banu D, et al. Fatty acids and their mixtures as phase-change materials for thermal energy storage[J].Solar Energy Materials, 1989, 18: 201-216.
  • 8Hawes D W, Banu D, Feldman D. Latent heat storage in concrete [J]. Solar Energy Materials, 1989, 19: 335-348.
  • 9Salyer I O . Thermoplastic , moldable , non - exuding phase change materials [P]. US 5565132,1996.
  • 10Kauranen P, Peippo K, Lund P D. An organic PCM storage system with adjustable melting temperature [J]. Solar Energy, 1991, 46(5): 275-278.

共引文献23

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部