摘要
滚轮螺母丝杠传动型控制棒驱动机构(CRDM)的主要失效模式是滚轮磨损。以滚轮为研究对象,利用通用的ADAMS仿真软件计算分析滚轮在正常、坑状缺陷及过度磨损状态下的振动信号特性。结果表明:在CRDM工作过程中,会产生明显的冲击信号;随着状态的劣化,冲击信号强度增强。
Abrasion is the primary cause for the failure of the roller screw drive type CRDM. This paper describes a method of CRDM roller state diagnosis based on computer simulation. Through a common simulation software ADAMS, the vibration characteristics of the roller under normal conditions, pit defects and excessive abrasion have been obtained. Research indicates that the roller will have a significant impact signal while working. With the deterioration of conditions, the impact signal will be enhanced.
作者
杨晓晨
李维
张黎明
杨方亮
张智峰
Yang Xiaochen Li Weil Zhang Liming Yang Fangliang Zhang Zhifeng(Science and Technology on Reactor System Design Technology Laboratory, Nuclear Power Institute of China, Chengdu, 610213, China Naval University of Engineering, Wuhan, 430033, China)
出处
《核动力工程》
EI
CAS
CSCD
北大核心
2017年第5期141-144,共4页
Nuclear Power Engineering