摘要
制备氟橡胶(FKM)/氢化丁腈橡胶(HNBR)复合材料,研究FKM用量对FKM与HNBR的相容性以及FKM/HNBR复合材料物理性能和耐热氧老化性能的影响。结果表明:FKM用量小于20份时,FKM和HNBR的相容性较好;随着FKM用量的增大,FKM/HNBR复合材料的拉伸强度逐渐降低;当FKM和HNBR共混比为10/90时,FKM/HNBR复合材料的100%定伸应力、拉断伸长率和撕裂强度出现峰值,同时耐热氧老化性能最好。
The FKM/HNBR composite was prepared,and the effect of the addition level of FKM on the compatibility between FKM and HNBR,physical properties,and heat oxygen aging property of FKM/HNBR composite was investigated.The results showed that,when the addition level of FKM was below 20 phr,the compatibility between FKM and HNBR was good;with the increase of the addition level of FKM,the tensile strength of FKM/HNBR composite decreased gradually;when the blending ratio of FKM/HNBR was 10/90,the tensile modulus at 100% elongation,elongation at break and tear strength of FKM/HNBR composite were the highest,and heat oxygen aging property was also the best.
作者
田帅承
李再峰
TIAN Shuaicheng LI Zaifeng(Qingdao University of Science and Technology,Qingdao 266042, Chin)
出处
《橡胶工业》
CAS
2017年第10期581-585,共5页
China Rubber Industry
基金
山东省自然科学基金资助项目(ZR2013EMM007)
青岛市科技计划基础研究项目(13-1-4-147-jch)
