摘要
根据磁流变抛光工艺特点,以华中HNC-818B型数控系统和S7-300为基础平台,构建了PKC-1000P2磁流变抛光机床控制系统。介绍了机床控制系统的组成、功能、软件架构。用STEP7开发了循环系统控制软件,用Wincc Flexible 2008开发了双循环系统人机交互界面,用VC6.0开发了双抛光头专用图形化HMI软件并与华中数控系统无缝集成,并开发了专用工艺固定循环指令。
According to the MRF process characteristic,a set of control system of the PKC-1000 P2 MRF machine with double polishing heads was constructed which was based on the HNC-818 B and the S7-300. The component,functions and software architecture of the control system were introduced. The control software of the double cycle systems was developed with STEP7. The human-machine interface software of the double cycle systems was developed with the Wincc Flexible 2008. The special graphic human-machine interface software was developed using VC6. 0 and was integrated seamlessly into the HNC software. And the canned cycle instructions of the special technology were realized.
出处
《制造技术与机床》
北大核心
2017年第11期48-50,共3页
Manufacturing Technology & Machine Tool
关键词
华中数控
磁流变抛光
双抛光头
循环系统
循环指令
HNC
magnetorheological finishing （MRF）
double polishing heads
cycle system
cycle instruction
