摘要
医疗机构污水具有来源广泛、成分复杂等特点,为满足《医疗机构水污染物排放标准》(GB 18466-2005)要求,人们必须对各类废水分别进行预处理,处理后的废水可以直接排放或进入污水处理站进行二次处理。本文首先分析并总结了医院污水处理的典型工艺及设计要点,然后以某医院污水处理工程为例,论述了其工艺路线、主要构筑物技术参数、运行中存在问题及对策,供其他工程参考。
The Medical sewage has the characteristics of extensive sources and complicated components, in order to meet the ＂medical water pollutant discharge standard＂（GB 18466-2005） requirements, people must be on various types of wastewater were pretreated respectively, the treated wastewater can be discharged directly or into the sewage treatment station for two times. This paper first analyzes and summarizes the typical process and design points of hospital sewage treatment, and then to a hospital sewage treatment project as an example, discusses the technological process, technical parameters, main structures in the operation of existing problems and Countermeasures for the reference to other engineering.
出处
《中国资源综合利用》
2017年第9期57-59,共3页
China Resources Comprehensive Utilization
关键词
医疗机构
污水处理
消毒
medical institutions
sewage treatment
disinfection
