摘要
建立了多铁纳磁体择多逻辑门的三维磁化动态模型,并施加应变时钟(应力或电压)对多铁择多逻辑门的择多计算功能进行了动态仿真,同时分析了应变时钟工作机制以及它与择多逻辑门可靠转换之间的关系.仿真结果表明所建三维动态模型准确地描述了择多逻辑门的工作机制,在30 MPa应力作用下,择多逻辑门接受新输入实现了正确的择多计算功能.研究还发现对中心纳磁体和输出纳磁体依次撤去应变时钟时,提前撤去输出纳磁体上的应力会降低择多逻辑门的正确计算概率,而延迟撤去输出纳磁体上的应力会降低择多逻辑门的工作频率.研究结果深化了人们对多铁择多逻辑门动态特性的认识,可为多铁逻辑电路的设计提供重要指导.
The scaling of traditional complementary metal oxide semiconductor(CMOS) device is reaching its physical limit,and alternative emerging devices are being explored as possible CMOS substitutes. One of the most promising device technologies is nano-magnetic logic(NML), which is an energy-efficient computing paradigm. The inherent nonvolatility and low energy consumption make NML device possess wide application perspectives. The basic element of multiferroic NML is a sub-100 nm sized single domain magnet. Generally, the x-y plane determines the in-plane dimension, while the z direction indicates the thickness of nanomagnet. Classical binary logic states "0" and "1" are encoded in two stable magnetization orientations along the easy axis(major axis) of the elliptical nanomagnet, while the hard axis(minor axis) refers to "null" logic. In order to propagate logic bits between the neighbor nanomagnets, one requires a clock that periodically flips every magnet's magnetization along the hard axis simultaneously, and the dipole-dipole interaction between the neighbors will force the magnet into the correct orientation along the easy axis, and thus the logic bit propagates unidirectionally. In multiferroic NML, the majority gate is a basic element of nanomagnet logcal circuit. In this paper, the three-dimensional switching dynamic model of a multiferroic nanomagnetic majority gate is established,and its magnetization dynamics is simulated by solving the Landau-Lifshitz-Gilbert equation with considering the thermal fluctuation effects. The majority gate is implemented with dipole-coupled two-phase(magnetostrictive/piezoelectric)multiferroic elements and is simulated by using different strain clocks and changing the input. It is found that the majority gate works efficiently and correctly when receiving new input. It is also found that the optimal time interval of stress releasing between central nanomagnet and output nanomagnet is 0.1-0.2 ns. Removing stress earlier will reduce the success rate of the majority gate operation while the work frequency increases. The reason behind the phenomenon may be that removing stress earlier results in weak dipole-coupled interaction, which cannot overcome the shape anisotropy.These findings are beneficial to the design of multiferroic logic circuit.
出处
《物理学报》
SCIE
EI
CAS
CSCD
北大核心
2017年第21期348-356,共9页
Acta Physica Sinica
基金
国家自然科学基金(批准号:11405270)
空军工程大学理学院博士后科研启动基金(批准号:2015BSKYQD03
2016KYMZ06)资助的课题~~
关键词
多铁纳磁体
择多逻辑门
应变时钟
磁化动态
multiferroic nanomagnet, majority gate, strain clock, magnetization dynamics