不同压烫机对粘合衬衣衬干热尺寸变化的影响

Effects of different pressing machine on heat dimensional change rate of shirt lining

压烫机有平板式压烫机和连续式压烫机。粘合衬衣衬经平板式压烫机压烫后,粘合强度强但领子处显呆板,现不少企业开始使用连续式压烫机压熨衬衣衬。然而根据FZ/T 01082—2009的规定:衬衣衬应采用平板式压烫机压烫,这与实际生产不符。文章通过研究这两类压烫设备对粘合衬衣衬干热尺寸变化率的影响,验证衬衣衬是否能采用连续式压烫机压烫。实验结果表明:粘合衬衣衬在两种压烫机上尺寸变化效果相似,也符合国标所规定的等级要求,因此衬衣衬可采用连续式压烫机压烫。研究结论对FZ/T 01082—2009标准的修订具有重要意义,且对纺织服装的实际生产具有实际指导作用。

There are two types of interlining pressing machine,flat pressing machine and continuous pressing machine. After the flat pressing machine is used for shirt lining,the adhesive strength is strong,but the collar is stiff.Thus,the continuous pressing machine is used by many manufacturers now. However,according to the standard of FZ/T 01082—2009,shirt lining should be pressed by the flat pressing machine,which is inconsistent with the actual production. In this paper,the effects of two kinds of equipment on heat dimensional change rate of shirt lining were studied to verify whether the shirt lining can be pressed by the continuous pressing machine. Experimental results have showed that the dimension change effects of shirt lining are similar by using the two kinds of equipment,and the product meets the class requirements. Hence,shirt lining can be pressed by the continuous pressing machine. The conclusion of this study is significant to the revision of the FZ/T 01082—2009 and has useful guiding significance for the actual production of textile and clothing.