摘要
采用华铸CAE/InteCast铸钢模块进行熔模铸造过程模拟运算,并将结果与实际铸造情况进行对比。采用Pidex三维建模,根据优化算法获得了特定生产工况下的物性参数和界面参数,根据组合参数数据库进行两种零件在各自工况下的多种工艺方案运算,并进行生产验证。结果表明,特定工况下的参数符合实际情况。
The casting process of CAE/lnteCast cast steel software modules was used to simulate the investment casting process and compared the results with the actual casting. Using Pidex three-dimensional modeling, the property parameters and interlace parameters were obtained according to the optimization algorithm, according to the combinatorial parameter database, two kinds of process scheme operations were carried out in different working conditions, and the production verification was carried out. The results show that the parameters in the specified conditions are in accordance with the actual conditions.
出处
《铸造技术》
北大核心
2017年第11期2764-2766,共3页
Foundry Technology
基金
四川省科技厅应用基础项目:基于熔融沉积FDM的快速熔模关键技术研究(2015JY0039)
四川工程职业技术学院:通用有限元软件铸造CAE的关键技术研究(YJ2015KY-02)
四川工程职业技术学院:面向高职工科学生的开源软件教育探索与实践(GG2016616149)
关键词
智能铸造
数值模拟
熔模铸造
组合参数数据库
intelligent casting
numerical simulation
investment casting
combination parameter database