摘要
蒸汽发生器进出口腔室的流场结构对倒流现象有重要影响,而进出口接管布置方式能改变其腔室流场结构。本文建立了两种不同接管布置方式蒸汽发生器三维模型,采用CFD方法模拟了其在低流量条件下的流动换热和流场结构,分析了接管布置方式对倒流现象的影响。研究结果表明:接管布置方式对腔室流动速度场产生显著影响,进而影响到U型管进出口压降和流量分配。适当改变接管布置方式可使流量分配不均匀性降低、U型管进出口负压降升高,从而使蒸汽发生器倒流发生的临界流量和倒流总流量降低。
The flow structure in plenum of steam generator has an important influence on the reverse flow phenomenon, and the inlet and outlet nozzle arrangements can change the flow structure in the plenum. In this paper, the three-dimensional models of steam generators with different nozzle arrangements were established. The flow struc-ture and heat transfer in those steam generators were simulated under low flow rate con-dition. The effects of nozzle arrangements on reverse flow phenomenon were analyzed. The results show that the nozzle arrangement has significant influence on velocity field in plenum, and then affects the pressure drop and flow distribution of U-tube. If the nozzle arrangement is changed properly, the flow distribution will be more uniform and the negative pressure drop will increase, thus the critical flow rate of reverse flow andthe reverse flow rate will decrease.
出处
《原子能科学技术》
EI
CAS
CSCD
北大核心
2017年第12期2177-2182,共6页
Atomic Energy Science and Technology
基金
国家自然科学基金资助项目(11502298)
中国核动力研究设计院核反应堆系统设计技术重点实验室基金资助项目(HT-ZDSY-02-2015004)