摘要
为提高电镀废水生物处理系统的稳定性,采用磁粉-弱磁场强化污泥系统。结果表明,实验系统COD_(Cr)、NH_3-N、Cu^(2+)和Ni^(2+)去除率分别比对照系统高12.55%、23.32%、21.13%和26.39%,污泥MLSS、FA(絮凝能力)和PN/PS(蛋白质/多糖)值也分别高出对照系统65.08%、68.48%和23.66%,强化后出水指标均达到电镀污染物排放新标准要求。
In order to improve the stability of biological treatment process for electroplating wastewater treatment, magnetic powder-weak magnetic field was added to strengthen the activated sludge treatment process. The results showed that the removal efficiencies of CODCr, NH3- N, Cu^2+ and Ni^2+ in the magnetic powder-weak magnetic field strengthen system were higher than those of the contrasted system by 12.55% ,23.32% ,21.13% and 26.39%, respectively. Moreover, the MLSS mass concentration FA as well as the PN/PS ratio were also higher than those of the contrasted system by 65.08%, 68.48% and 23.66%, respectively. The effluent quality of the test system met the new emission standard of electroplating wastewater after strengthening.
出处
《电镀与精饰》
CAS
北大核心
2017年第12期41-46,共6页
Plating & Finishing
关键词
磁粉
弱磁场
电镀废水
活性污泥
沉降性能
magnetic powder
weak magnetic field
electroplating wastewater
activated sludge
settling property