期刊文献+

工作性能水平约束下多状态系统可靠性分析 被引量:1

Reliability Analysis of Multi-state System under the Constraint of Work Performance Level
下载PDF
导出
摘要 在实际工程应用中,要考虑系统运行过程中可能会因为受各类外界因素(如温度、压力、流量、功率等)的影响而导致对系统性能需求不同;针对系统性能受工作需求性能水平约束的现象,对传统Markov过程进行改进,提出改进型Markov过程;在考虑工作需求性能水平约束的条件下,利用改进型Markov过程来分析多状态串并联系统的可靠性,并给出简单的实例分析;结果表明该方法与传统可靠性分析方法相比,大大降低了计算的复杂程度. In practical engineering application,it is necessary to consider that the system performance may be affected by various factors such as temperature,pressure,flow,power and so on to cause different demands of system performance. According to the phenomenon that the system performance is constrained by the performance level of work requirements,the traditional Markov process is improved,and the improved Markov process is proposed. Under the condition of taking into account the performance level constraint,the improved Markov process is used to analyze the reliability of multi-state series parallel system,and a simple example analysis is given. The results show that compared with the traditional reliability analysis methods,this method greatly reduces the computational complexity.
出处 《重庆工商大学学报(自然科学版)》 2017年第6期79-86,共8页 Journal of Chongqing Technology and Business University:Natural Science Edition
基金 中国铁路总公司科技研究开发计划重大课题(2016J007-B) 国家重点研发计划任务(2016YFB1200401-102A) 国家科技支撑计划(2015BAG19B02-10)
关键词 多状态系统 性能水平 结构函数 改进型Markov过程 可靠性 multi-state system performance level structural function improved Markov process reliability
  • 相关文献

参考文献4

二级参考文献43

  • 1贾亚洲.提高国产数控机床可靠性水平[J].机电新产品导报,2006(5):92-94. 被引量:16
  • 2宋述芳,吕震宙.系统可靠性灵敏度分析方法及其应用研究[J].机械强度,2007,29(1):53-57. 被引量:11
  • 3普罗尼科夫 A.C.数控机床的精度与可靠性[M].李昌琪,遇立基,译.北京:机械工业出版社,1987.
  • 4O'CONNOR P D T.Practical reliability engineering[M].4th ed.New York,N.Y.,USA:John Wiley & Sons,2002.
  • 5THEODOR F,JACK H S.Impact of machining parameters on machine reliability and system productivity[J].Transactions of the ASME,2002,124(2):296-304.
  • 6JOHN B.Calculating machine reliability from bearing life[J].Machine Design,2005,77(3):55-57.
  • 7MERRICK J R W,REFIK S,MAZZUCHI T A.a Bayesian semiparametric analysis of the reliability and maintenance of machine tools[J].Technometrics,2003,45(1):58-69.
  • 8SAVSAR M.Reliability analysis of a flexible manufacturing cell[J].Reliability Engineering and System Safety,2000,67(2):147-152.
  • 9JOSEPH V R,YU T.Reliability improvement experiments with degradation data[J].IEEE Transactions on Reliability,2006,55 (1):149-156.
  • 10BAE S J,KUO W,KVAM P H.Degradation models and implied lifetime distributions[J].Reliability Engineering and System Safety,2007,92(5):601-608.

共引文献26

同被引文献8

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部