不同卷烟机用低温快干搭口胶的工艺参数优化及应用

Optimization and application of technological parameters of low-temperature fast-drying cigarette lap adhesive for different cigarette rolling machines

采用低温快干搭口胶对卷烟机搭口烙铁温度、胶泵供胶的工艺参数进行优化,确定了不同机型(如ZJ17、PROTOS 2-2、PASSIM和GD121等)适宜的烙铁温度(如180、180、200、200℃等)、PROTOS 2-2机型的胶泵供胶量为9 g/500 m、PASSIM机型的胶泵转速为11 r/min和GD121机型的胶泵转速百分比为9%,并完成了多批次上机生产应用验证。研究结果表明:采用低温快干搭口胶生产的卷烟产品质量稳定,并且各卷烟机型的烙铁工作温度和烟支单支施胶量平均分别降低了27.6%和23.7%,而且烟条跑条、烟支爆口等总次数降低了84.5%。

When some parameters（such as temperature of soldering iron,and spraying glue parameters alongcigarette lap）for cigarette rolling machine were optimized by low-temperature fast-drying cigarette lap adhesive,itwas ascertained which suitable temperatures of soldering iron for different models（ZJ17,PROTOS 2-2,PASSIM,and GD121）were 180,180,200,200 ℃ respectively. The optimizing spraying glue parameter as following：9 g/500 m for PROTOS 2-2 model,11 r/min of pump speed for PASSIM model,9% of pump speed percentage for GD121 model,which already were confirmed by many times production application verification. The research resultsshowed that the quality of above adhesive and its cigarettes are stable for all cigarette rolling machine models,andthe temperature of soldering iron and the amount of single cigarette coating glue are decreased averagely by 27.6%and 23.7% respectively. Some processing problems such as total times of cigarette migration and cigarette cracking-off were reduced by 84.5%.