期刊文献+

水泥熟料堆积体渗流换热的管道等效模型研究

Research on pipe equivalent model of seepage and heat transfer for clinker particles accumulation body
下载PDF
导出
摘要 本文将管道流动换热理论与多孔介质达西渗流理论结合,建立了具有多孔介质特性的熟料颗粒堆积体渗流换热的等效管道换热物理模型,推导了熟料颗粒堆积体的多孔介质参数与等效管道参数的对应关系,并通过数值仿真计算,给出了等效管道模型的管直径、管内气体流速、管数量随熟料颗粒直径与熟料单元体孔隙率的变化曲线,为堆积颗粒多孔介质的简化提供了理论方法与等效数据。 Based on the combination of porous media’s Darcy seepage theory and the pipe’s flow heat transfer theory,the seepage and heat transfer process of clinker particles accumulation body that with porous media characteristic can be equivalent to the heat transfer model of pipe. Then the congruent relationship between the porous media parameters and the equivalent pipe parameters is structured. By numerical simulation,the pipe diameter,gas velocity inside the pipe as well as the pipe number of the equivalent pipe model is calculated. With the changing curve of clinker particles diameter and the clinker unit body porosity,the theoretical method and equivalent data are provided for the simplification of the accumulation particles porous media.
出处 《燕山大学学报》 CAS 北大核心 2017年第6期550-554,共5页 Journal of Yanshan University
基金 国家自然科学基金资助项目(51641609) 河北省自然科学基金资助项目(F2016203354)
关键词 水泥熟料 多孔介质 渗流换热 颗粒堆积体 cement clinker porous medium seepage heat transfer particle packing
  • 相关文献

参考文献9

二级参考文献38

  • 1冯绍航,徐德龙,李辉,陈延信,肖国先.篦冷机中气固两相换热过程的模拟研究[J].西安建筑科技大学学报(自然科学版),2007,39(2):224-229. 被引量:18
  • 2[3]Van Den Berg H R,Ten Seldam C A,Van Der Gulik P S.Compressible Laminar Flow in a Capillary.J.Fluid Mech,1993,246:1-20
  • 3[4]Van Den Berg H R,Ten Seldam C A,Van Der Gulik P S.Thermal Effects in Compressible Viscous Flow in Acapillary.Int.J.Thermophys,1993,14:865-892
  • 4[5]John C.Harley,Yufeng Huang,Haim H.Bau et al.Gas Flow in Micro-Channels.J.Fluid Mech.,1995,284:257-274
  • 5Tuckermann D B , Pease R F W. High performance heat sink for VISI.IEEE Electron Device Letters, 1981, 2(4):126~129
  • 6Koh J C Y, Colony R. Heat transfer of microstructures for integrated circuits.Int. Comm. Heat Mass Transfer., 1986, 13(1):89~98
  • 7Tien C L, Kuo S M. Analysis of forced convection in microstructures for electronic system cooling.In:Proc. Int. Symp. Cooling Technology for Electronic Equipment, Honolulu, HI, 1987:217~226
  • 8Vafai K, Tien C L. Boundary and inertia effects on flow and heat transfer in porous media.Int. J. Heat Mass Transfer, 1981, 24(3):195~203
  • 9Sparrow E M, Baliga B R, Patankar S V. Forced convection heat transfer from a shrouded fin array with and without tip clearance.ASME Journal Heat Transfer, 1978, 100(8):572~579
  • 10Knight R W, Goodling J S, Hall D J. Optimal thermal design of forced convection heat sinks-analytical. ASME Journal of Electronic Packaging, 1991, 113(4):313~321

共引文献63

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部