摘要
模型是BIM技术的载体。水利工程BIM流程的标准化是模型在二维设计方案的空间、信息多维度延伸的基础上,高效完成综合交付的重要一环。以泵闸工程为BIM实践案例,采用三维协同技术,提出以专业分工为基础,以并行作业为条件,以地理位置为总装空间的协同建模流程。通过比较传统二维制图和三维协同抽图在效率、准确性、综合性、可修改程度等方面的差异,提出泵闸工程BIM协同建模的优势及可进一步优化的措施。说明采用BIM协同建模和抽图在泵闸工程设计中具有较高推广应用的技术价值。
A model is a carrier of BIM technology. The standardization of BIM processes with Water Engineering is an important part of the integrated and efficient delivery when the model is based on the two-dimensional design space and the multi-dimensional extension of information. In the case of Pump and Sluice BIM practice, the paper adopts the three-dimensional collaborative technology, and puts forward the collaborative modeling process based on professional division of labor, the parallel operation as the condition and the geographical location as the general assembly space. By comparing the differences of efficiency, accuracy, comprehensiveness and modification degree between traditional two-dimensional drawing and three-dimensional collaborative drawing composition, the advantages of BIM collaborative modeling in Pump and Sluice engineering and the measures to be further optimized are put forward. The technical value of BIM collaborative modeling and drawing composition in the design of Pump and Sluice engineering has high popularization and Application
出处
《上海水务》
2017年第4期39-41,共3页
Shanghai Water
关键词
泵闸工程设计
BIM流程
协同建模
并行作业
pump and sluice engineering design
BIM process
collaborative modeling
parallel operation.