关于支吊架设计手册的修改建议

Modification of the Design Manual on Hangers

目前通用的六道和管道的支吊架设计手册由于编写年代较久远,与其后颁布实施的六道设计规程和管道设计规程在普通碳钢部件的选用材质牌号、允许使用温度、部件最大允许荷载等都存在一些问题。通过对六道和管道支吊架设计手册,六道设计规程和管道设计规程进行对比,在普通碳钢部件的选用材质牌号、允许使用温度、部件最大允许荷载上提出相关的修改意见。

Currently universal hanger design manual about flue, duct and pipe are compiled many years ago.Comparing to the flue, duct and pipe design rules published alter it there are some differences in the selection of materials piping design grades in ordinary carbon steel components, the use of allowing temperature, the maximum allowable load and so on.According to the comparison of the smoke duct and pipe banger design manual, the smoke duct design procedures and piping design procedures, There are some relevant amendments in the selection of material grades of ordinary carbon steel components, allowing the use of temperature, the maximum allowable load components.