期刊文献+

降低机采棉纺纱棉结的几点体会

Some Experiences about Reducing Spinning Nep of Machine Picked Cotton
下载PDF
导出
摘要 探讨采用机采棉加工JC 14.8tex赛络集聚纱的工艺优化措施。采取跳过单轴流、双轴流开棉机的清梳联工艺流程,加大多仓混棉机棉箱密度,降低打手速度,选择双齿锡林针布,适当减少预并并合数,缩短精梳给棉长度,加深顶梳深度,最终半制品棉结和杂质得到有效降低,短绒率减少,成纱质量得到明显改善。认为:降低成纱棉结是发挥机采棉品种优势的关键。 Technology optimization measures of producing JC 14.8 tex siro condensed yarn were discussed by adopting machine picked cotton. Adopting the blowing carding technology which did not adopted the single axial flow opening machine and the double axial-flow opening machine,increasing hopper density of multi-mixer, reduc- ing beater speed, choosing double-tooth cylinder clothing, reducing the number of pre-drawing, reducing the feed length of combing,deepening insertion length of top comb, neps and impurity of semi-finished product and short fiber radio were reduced. Finally, yarn quality was improved obviously. It is considered that reducing yarn neps is the key to make the variety advantages of machine picked cotton.
出处 《棉纺织技术》 CAS 北大核心 2018年第1期54-56,共3页 Cotton Textile Technology
关键词 机采棉 棉结 工艺参数 纺专器材 成纱质量 Machine Picked Cotton, Nep, Technology Parameter, Spin Special Components & Accessories,Yarn Quality
  • 相关文献

参考文献2

二级参考文献4

共引文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部