期刊文献+

底涂晾置时间和次数对聚氨酯胶剪切强度的影响 被引量:1

The Influences of Drying Time and Brushing Times of Primer on the Shear Strength of Polyurethane Adhesive
下载PDF
导出
摘要 以电泳钢板和钢化玻璃板为基材,经活化和底涂处理后用聚氨酯胶黏剂粘接,考察底涂晾置时间和底涂次数对于聚氨酯胶黏剂粘接强度的影响。结果表明,晾置时间低于5 h是合适的,剪切强度变化不明显。底涂次数对于剪切强度影响较大,涂刷1次时,随着底涂晾置时间的增加,剪切强度变化不明显;涂刷2次以上,剪切强度下降明显。 The electrophoresis steel plate and tempered glass plate were bonded by polyurethane adhesive after activation and primer-treated. The influences of drying time and brushing times of the primer on the bonding strength of polyurethane adhesive were investigated. The results showed that the change of shear strength was not obvious and the shear strength was suitable when the drying time less than 5 hours. The effect of the brushing times of primer on the shear strength was greater. The change of shear strength was not obvious with the increase of the drying time if brushing one time. The shear strength decreased significantly when brushing more than two times.
出处 《聚氨酯工业》 北大核心 2017年第6期26-27,33,共3页 Polyurethane Industry
关键词 聚氨酯胶黏剂 底涂 晾置时间 剪切强度 polyurethane adhesive primer drying time shear strength
  • 相关文献

参考文献3

二级参考文献15

共引文献14

同被引文献14

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部