摘要
针对轻薄毛/涤高支哔叽面料品质要求较高,必须在生产过程中综合考虑各方面因素确定工艺参数,并通过过程调节达到最合理的水平。文章通过原料的选取及配比,高支纱生产过程中的质量控制,织造前经纬纱的准备,整经、上浆以及织造工艺参数的合理设计等方面的研究,得出,轻薄毛/涤高支哔叽的原料选择、纱线质量控制是前提,织造前经纬纱的准备是关键,织造工艺参数的合理配置是保障,织造过程的质量控制不容忽视。
For light wool/polyester high serge fabric quality request is higher,the determination of process parameters must be considered in the process of production factors, and through the process adjustment to achieve the most reasonable level. From the selection and comparison of raw materials,fine yarn production process of quality control,weaving before and after the preparation of warp and weft, warping,sizing and weaving process parameters of the rational design and other aspects of exploration the paper studies the processes. Through the practical experience of production,the choice of raw materials, the quality of the yarn is the prerequisite,the preparation of the weft yarn before weaving is the key,the reasonable configuration of the weaving process parameters is the guarantee,and the quality control of the weaving process can not be ignored.
出处
《毛纺科技》
CAS
北大核心
2018年第1期1-5,共5页
Wool Textile Journal
基金
山东省优势特色专业项目(SDY201501)
关键词
毛/涤
高支
哔叽
生产工艺
质量控制
wool polyester blend
high count
serge
production technology
quality control