摘要
Research on applying a supercritical carbon dioxide power cycle （S-CO2） to concentrating solar power （CSP） instead of a steam Rankine cycle or an air Brayton cycle has been recently conducted. An S-CO2 system is suitable for CSP owing to its compactness, higher efficiency, and dry-cooling capability. At the Korea Institute of Energy Research （KIER）, to implement an S-CO2 system, a 10 kWe class test loop with a turbine- alternator-compressor （TAC） using gas foil bearings was developed. A basic sub-kWe class test loop with a high- speed radial type turbo-generator and a test loop with a capability of tens of kWe with an axial type turbo- generator were then developed. To solve the technical bottleneck of S-CO2 turbomachinery, a partial admission nozzle and oil-lubrication bearings were used in the turbo- generators. To experience the closed-power cycle and develop an operational strategy of S-CO2 operated at high pressure, an organic Rankine cycle （ORC） operating test using a refrigerant as the working fluid was conducted owing to its operational capability at relatively low- pressure conditions of approximately 30 to 40 bar. By operating the sub-kWe class test loop using R134a as the working fluid instead of CO2, an average turbine power of 400 W was obtained.
Research on applying a supercritical carbon dioxide power cycle （S-CO2） to concentrating solar power （CSP） instead of a steam Rankine cycle or an air Brayton cycle has been recently conducted. An S-CO2 system is suitable for CSP owing to its compactness, higher efficiency, and dry-cooling capability. At the Korea Institute of Energy Research （KIER）, to implement an S-CO2 system, a 10 kWe class test loop with a turbine- alternator-compressor （TAC） using gas foil bearings was developed. A basic sub-kWe class test loop with a high- speed radial type turbo-generator and a test loop with a capability of tens of kWe with an axial type turbo- generator were then developed. To solve the technical bottleneck of S-CO2 turbomachinery, a partial admission nozzle and oil-lubrication bearings were used in the turbo- generators. To experience the closed-power cycle and develop an operational strategy of S-CO2 operated at high pressure, an organic Rankine cycle （ORC） operating test using a refrigerant as the working fluid was conducted owing to its operational capability at relatively low- pressure conditions of approximately 30 to 40 bar. By operating the sub-kWe class test loop using R134a as the working fluid instead of CO2, an average turbine power of 400 W was obtained.
