摘要
运用UG绘图软件建造制动盘实体模型以及毛坯并采用Deform-3D有限元软件对制动盘的分块模锻进行数值模拟。针对不同的分块方案以及温度设定,通过数据分析计算,工艺设计与计算机工艺仿真,对成形过程中行程载荷、应力场以及速度场的差别进行分析,研究各方案对制动盘成形效果的影响,通过数据比较,最终得出最佳的制动盘分块方案。
The UG drawing software was used to construct the brake disc solid model and the billet, and the deformation of the brake disc was simulated by Deform-3D finite element software. According to the different block scheme and the temperature setting, the difference between the stroke load, the stress field and the velocity field is analyzed by the data analysis and calculation, the process design and the computer process simulation. The effects of the scheme on the forming effect of the brake disc Influence, through the data comparison, and ultimately get the best brake disc block scheme.
出处
《科技创新导报》
2017年第31期104-105,共2页
Science and Technology Innovation Herald
基金
南京工程学院大学生科技创新基金(项目编号:TB201702079)
江苏省高等学校大学生创新创业训练计划(项目编号:201711276077H)
