摘要
提出了一种基于纠缠见证的路径纠缠微波信号检测方法.路径纠缠微波是微波频段上的连续变量纠缠,介绍了利用微波压缩态和微波分束器制备路径纠缠微波的方法.根据部分转置正定判据以及2?2纠缠态密度矩阵的部分转置具有负本征值的性质,分别对常见的两种2?2纠缠进行了纠缠见证算符的构造,用于对两路信号是否为纠缠态进行判定.将连续变量纠缠的路径纠缠微波分解为大量2?2纠缠子系统叠加的纠缠态,证明其能够利用所构造的2?2纠缠见证算符来检测路径纠缠微波.同时分析了微波分束器的作用,并利用微波分束器设计了一种用于检测路径纠缠微波信号的实验方案,并在理论上分析了纠缠检测所得到的结果.结果表明,该方法能够有效检测路径纠缠微波信号,降低了检测的复杂度和计算量.本文的研究为纠缠微波的检测提供了思路.
In recent years, the great progress of studying the quantum entanglement has been made. In the field of optics, the great success has been achieved in quantum entanglement theory and technology. Then researchers concentrate on the microwave frequency band whose frequency is lower than that of optical frequency band. The signal in the microwave frequency band has a longer wavelength, and it has the diffraction capability that the optical signal does not possess. Furthermore, it can spread further in complex environments. Now it is possible to experimentally produce squeezed state of microwave signals and spatially separated path-entangled microwave signals. It is an important issue to judge whether the microwave signals received through dual paths are in entanglement state. In this paper, we firstly introduce the method of using squeezed state of microwave and microwave beam splitter to prepare path-entangled microwave signals. Then we use entanglement witness method to detect entanglement. Through constructing the entanglement witness operator in path-entangled microwave signals, the entanglement of path-entangled microwave signals can be effectively detected. We decompose the expression of the continuous variables path-entangled microwave signals into a large number of 2 ? 2 entangled superposition states, deduce an entangled witness operator of path-entangled microwave signals based on the principle of partial transpose criterion and entanglement witnessing, and prove that the entangled witness can be used to detect the path-entangled microwave signals. Finally, we propose a physical verification of path-entangled microwave signal entanglement. The verification can be realized as follows:firstly, we reverse the phase of a received quantum-state microwave signal by utilizing continuous variable controlled phase gate in a range of 0-π, then we send two microwave signals into the two input ports of the microwave beam splitter, and we operate coincidence counting of microwave photons on the two output ports after entanglement microwave signals have passed through the microwave splitter. By analyzing the results of the whole process, we have the following conclusions:if the coincidence rate of two input signals is higher than that of non-entangled microwave signals under the same power, signals can be counted as entanglement. The proposed method can detect the entangled microwave signals more efficiently than the conventional methods, such as quantum state reconstruction, and thus reduce the detection and computational complexity. The entanglement of the two microwave quantum state signals can be observed directly by using this method. This paper provides a new idea for detecting the path-entangled microwave signals.
出处
《物理学报》
SCIE
EI
CAS
CSCD
北大核心
2018年第4期13-20,共8页
Acta Physica Sinica
基金
国家自然科学基金(批准号:61573372
61603413)资助的课题~~
关键词
路径纠缠微波
纠缠见证
纠缠微波检测
path-entangled microwave signals
entanglement witness
detection of path-entangled microwave signals