摘要
采用放置式探头对带有不同厚度涂层的含有表面缺陷的钢板进行涡流检测,研究涡流检测表面缺陷的能力与涂层厚度之间的关系。结果表明:在表面涂层厚度不大于2 500μm时,使用放置式探头的涡流检测方法检测钢板上的不同类型缺陷和不同深度缺陷的效果更好。
The relationship between the effectiveness of detecting surface defects and the coating thickness was researched with the method of eddy current testing,and the placed type probe was used to inspect a defective steel plate with different coating thicknesses.Results have shown that better testing effect for surface defects on a steel plate with different categories and different depths can be realized by the eddy current test using a placed type probe if the surface coating thickness is not greater than 2 500 μm.
出处
《无损检测》
2018年第1期34-36,共3页
Nondestructive Testing
关键词
放置式探头
涂层
涡流检测
不同类型
不同深度
plaeed type probe
coating
eddy current testing
different category
different depth