摘要
采用高固含量乙烯-醋酸乙烯(EVA)共聚乳液制备了一种低温快干型卷烟搭口胶,其配方组成(质量份)为,EVA乳液93%~95%、PVA(聚乙烯醇)乳液2%~4%、辅助剂2%~3%;应用于7000~11000支/min的高速卷烟机上,结果表明,开机烙铁工作温度从原来的240℃降至160℃,卷烟设备供胶稳定、涂胶均匀,干燥速率较快,粘接牢固,烟支搭口光滑。
A cigarette lap adhesive was prepared with the high-solid content ethylene-vinyl acetate-( EVA) copolymer emulsion. The adhesive composition by mass is as follows:EVA emulsion 93~95 %,PVA solution 2~4 %,and adjuvant additive 2~3 %.The adhesive was applied on the cigarette rolling machine running with 7000 ~11000 pcs/min. The results show that when the soldering iron of the machine is working at 160 ℃( previously it was 240 ℃),the adhesive spraying of tobacco equipment is stable, the adhesive layer is uniform,the bonding is firm,and the cigarette mouth lap is smooth.
出处
《粘接》
CAS
2018年第3期48-52,47,共6页
Adhesion
基金
云南中烟技术中心烟草行业卷烟工艺与装备研究重点实验室开放课题项目"卷烟搭口胶性能改进与工艺匹配研究"(计划文号:实验室[2016]01号
任务书编号:2016GYSYS04)
关键词
醋酸乙烯-乙烯共聚乳液
高固含量
卷烟机
烙铁温度
ethylene-vinyl acetate copolymer emulsion
high solid content
cigarette rolling machine
solidering iron temperature