基于Moldflow汽车椅背板的模流分析

Mold flow analysis of the back plate of car seat

利用Pro/E软件设计了汽车椅背板的制品模型,通过Moldflow软件进行模流分析。设计了两种不同浇注方案,对比两点热流道浇口和三点热流道浇口对制品的成型质量影响,并对模具的浇注系统和冷却系统以及制品的气穴、缩痕指数、翘曲变形进行了分析,得出两点热流道浇口比三点热流道浇口的浇注方案更加合理的结论,为模具设计提供了理论依据。

The product model of the back plate of car seat was designed by Pro/E software.Then,the mold flow analysis was carried out by Moldflow software.Two different casting schemes were designed to compare the influence of the two point hot runner and the three point hot runner on the molding quality of the product.The cavitation,shrinkage index and warping deformation of the product and the casting system and cooling system of the mould were analyzed.The results show that the pouring scheme of the two point hot runner is more reasonable than the scheme of the three point hot runner,which provides the theoretical basis for mould design.