期刊文献+

船用核动力设备LOCA鉴定曲线 被引量:3

LOCA Identification Curve of Marine Nuclear Power Plant
下载PDF
导出
摘要 LOCA(冷却剂丧失事故)鉴定曲线是LOCA试验的核心,要同时考虑各种失水事故的温度压力峰值和鉴定试验的可行性;介绍了LOCA鉴定装置及LOCA鉴定曲线,分析了建立适合船用核动力设备的LOCA鉴定曲线的必要性,通过模拟船用核反应堆多种破口失水事故,分析了LOCA事故后堆舱温度压力变化情况,在此基础上建立了合理的LOCA鉴定曲线;该曲线具有合适的包络性和经济性,为今后的鉴定试验打下基础。 The LOCA( Loss of Coolant Accident) identification curve is core of the LOCA identification test,both the peak valve of temperature and pressure of various LOCA and the feasibility of the identification test should been considered. The LOCA identification device and LOCA identification curve were introduced,and it analyzed the necessity of establishing the LOCA identification curve which was suitable for marine nuclear power plant,and it simulated kinds of loss of coolant accident of marine nuclear power Plant,and analyzed temperature and pressure changes in cabin,and established a reasonable LOCA identification curve based on it. The curve has appropriate containment and economical efficiency,laid foundation for the identification test in the future.
出处 《兵器装备工程学报》 CAS 北大核心 2018年第2期69-73,共5页 Journal of Ordnance Equipment Engineering
关键词 船用核动力 LOCA 鉴定曲线 marine nuclear power LOCA identification curve
  • 相关文献

参考文献4

二级参考文献14

  • 1Mota J P B, Rodrigues A E, Tondeur D. A simulation model of a high - capacity methane adsorptive storage system [ J ] . Adsorption, 1995, 1 (1): 17-27.
  • 2英国ATE公司.CFX4.3技术手册[M].2000.
  • 3Ostrach S. Natural convection heat transfer in cavities and cells [J] . Proc 7th International Heat Transfer Conference, 1982 , (1): 367-379.
  • 4Hoogendoom C J. Natural convection in enclosures [ J] . Proc 8th International Heat Transfer Conference, 1986 (1) : 111 - 120.
  • 5杨世铭 张超 许志雄.高Ra数条件下封闭空间内换热的实验研究.工程热物理学报,1988,.
  • 6ASME QME-1:2002,核电厂能动机械设备的鉴定[S].
  • 7ASME第Ⅲ卷2004,BPVC规范[S].
  • 8RCC-M2000(R2002),压水堆核岛机械设备设计和建造规则[S].
  • 9成大先.机械设计手册第2卷[M].北京:化学工业出版社,2007.
  • 10张美玲.LOCA鉴定试验台控制系统研究[c].2009年电力自动化创新论坛.

共引文献18

同被引文献37

引证文献3

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部