期刊文献+

Wetting Behavior of Graphite and CFC Composites by Cu-Ti Compacts

Wetting Behavior of Graphite and CFC Composites by Cu-Ti Compacts
下载PDF
导出
摘要 The wetting behavior of Cu-Ti powder compacts with 22 wt %Ti and 50 wt %Ti on carbon materials, including graphite and carbon fiber reinforced carbon composites(CFC), has been investigated in a vacuum using the sessile drop method. The equilibrium contact angles of Cu-22Ti(containing 22 wt%Ti) on the graphite and the CFC substrates at 1 253 K are 32 o and 26 o, respectively, whereas the equilibrium contact angle of 9° is obtained for Cu-50Ti(containing 50 wt%Ti) on both the graphite and the CFC substrates at 1 303 K.Microstructural analysis of the wetting samples shows that a thin TiC reaction layer is developed at the interfacial area and Ti-Cu intermetallic compounds are formed over the reaction layer. The investigation on the spreading kinetics of Cu-Ti compacts on carbon materials substrates at fixed temperatures reveals that the spreading is controlled by the interfacial reactions in the first stage and then by the diffusion of the active Ti from the drop bulk to the triple line in the later stage. The spreading is promoted by the intense reaction at higher Ti concentrations. The wetting behavior of Cu-Ti powder compacts with 22 wt %Ti and 50 wt %Ti on carbon materials, including graphite and carbon fiber reinforced carbon composites(CFC), has been investigated in a vacuum using the sessile drop method. The equilibrium contact angles of Cu-22Ti(containing 22 wt%Ti) on the graphite and the CFC substrates at 1 253 K are 32 o and 26 o, respectively, whereas the equilibrium contact angle of 9° is obtained for Cu-50Ti(containing 50 wt%Ti) on both the graphite and the CFC substrates at 1 303 K.Microstructural analysis of the wetting samples shows that a thin TiC reaction layer is developed at the interfacial area and Ti-Cu intermetallic compounds are formed over the reaction layer. The investigation on the spreading kinetics of Cu-Ti compacts on carbon materials substrates at fixed temperatures reveals that the spreading is controlled by the interfacial reactions in the first stage and then by the diffusion of the active Ti from the drop bulk to the triple line in the later stage. The spreading is promoted by the intense reaction at higher Ti concentrations.
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2018年第1期35-42,共8页 武汉理工大学学报(材料科学英文版)
基金 Funded by the National Natural Science Foundation of China(No.51304148) the Scientific Research Project under Hubei Provincial Department of Education(No.D20131504) Graduate Education Innovation Fund of Wuhan Institute of Technology(No.CX2016008)
关键词 joining wetting interfaces wetting carbon materials joining, wetting, interfaces, wetting carbon materials
  • 相关文献

参考文献2

二级参考文献30

  • 1易振华,易茂中,冉丽萍,杨琳.添加钛对炭/炭复合材料渗铜的影响[J].中国有色金属学报,2006,16(7):1214-1218. 被引量:21
  • 2秦优琼,冯吉才,张丽霞.C/C复合材料与TC4合金钎焊接头的组织与性能分析[J].稀有金属材料与工程,2007,36(7):1210-1214. 被引量:11
  • 3KUNIGA K. Application of copper-carbon fiber composites to power semiconductor devices [J]. Japan Inst Metals, 1986, 50(6): 583-589.
  • 4ISE H, SATOH S, AKIBA M, et al. Development of fabrication technologies for the ITER dibertor [J]. Fusion Engineering and Design, 1998, 98(39/40): 513-519.
  • 5MASSALSKI T B. Binary Alloy Phase Diagrams [D]. ASM Metals Park, 1986(15): 86-92.
  • 6T.AKEO O, TASUO O. Effects of titanium addition on the microstructure of carbon/copper composites materials [J]. Solid State Communications, 2007, 141 (6): 132-135.
  • 7APPENDINO P, FERRARIS M, CASALEFNO V, et al. Proposal for a new technique to join CFC composites to copper [J]. Journal of Nuclear Materials, 2006, 348(13): 102-107.
  • 8APPENDINO P, CASALEFNO V. Joining of C/C composites to copper [JJ. Fusion Engineering and Design, 2003, 66(7): 225- 229.
  • 9MEROLA M, ORSINI A. Influence of the manufacturing heat cycles on the CuCrZr properties [J]. Journal of Nuclear Materials, 2002, 307/311: 677-680.
  • 10SCHEDLER B, HUBERT. Methods to determine the joint strength of C/C to copper joints [J]. Fusion Engineering and Design, 2007, 82(12): 1786-1792.

共引文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部