期刊文献+

压气机叶栅叶顶间隙流的动力学模态分解 被引量:5

Dynamic Mode Decomposition of Tip Clearance Flow in a Compressor Cascade
下载PDF
导出
摘要 为了研究低速孤立压气机叶栅叶顶间隙流的非定常运动型态,采用大涡模拟(LES)技术对流场进行数值模拟,并运用动力学模态分解(DMD)技术对x/c=1.0677弦长处S3截面叶顶二次流速度场进行模态分析。结果表明:动力学模态分解(DMD)能够得到速度场的定常模态和不同频率下的主要振荡特征。同时揭示了频率为f1=824.9Hz的一阶振荡主要表现为泄漏涡的低频周期性生成与退化;而频率为f2=9807.2Hz的二阶振荡是由叶顶移动端壁形成剪切层内的不稳定造成的,主要表现为泄漏涡的振荡与分裂。 In order to research the unsteady flow pattern of the tip clearance flow in a low velocity isolated compressor cascade,LES was used in numerical simulation of the flow field,Dynamic Mode Decomposition(DMD)was conducted to analyze the velocity field of tip secondary flow in section S3 at x/c=1.0677 chord length.The results showed that DMD was able to extract the steady mode and the main oscillation feature with different frequencies from original velocity fields. Meanwhile,the velocity dynamic modes fully revealed that,the first mode oscillation with lower frequency f1=824.9 Hz was caused by the generation and fade of the tip leakage vortex,and the instability of moving end-wall shear layer gave rise to the second mode oscillation with higher frequency f2=9807.2 Hz which reflected in the oscillation and division of the tip leakage vortices.
出处 《推进技术》 EI CAS CSCD 北大核心 2018年第3期520-527,共8页 Journal of Propulsion Technology
基金 国家自然科学基金(51476106)
关键词 动力学模态分解 叶顶间隙流 叶顶泄漏涡 移动端壁 Dynamic mode decomposition Tip clearance flow Tip leakage vortex Moving end-wall
  • 相关文献

参考文献8

二级参考文献45

共引文献60

同被引文献53

引证文献5

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部