摘要
针对目前自动白平衡算法中存在的白色区域检测错误导致白平衡失效的问题,本文提出了一种基于暗通道优先的白平衡算法。首先估计光线透射率,然后根据光线透射率来提取白色区域,去除掉高饱和度的区域。最后为了校正颜色并保证图像亮度不变化,在CIE-XYZ颜色空间相对于亮度通道Y来计算校正增益。实验表明,本文的算法和现有的一些经典算法相比,在主观视觉和客观评价上都取得了较好的效果,且在嵌入式设备上速率大于150 frames/s。
In order to overcome the problem that white balance failure caused by white region detection error in automatic white balance,this paper proposes a white balance method based on dark channel prior.First,get the dark channel image,then extract the white region in the image according to the dark channel,and then remove the region with high saturation.Finally,in order to correct the color and ensure that the image brightness does not change,we calculate the correction gain in the CIE-XYZ color space relative to the luminance channel Y.Experimental results show that our algorithm has achieved good results both in subjective and objective evaluation compared with some classical algorithms,and the rate is greater than 150 frames/s on embedded devices.
作者
王飞
王伟
Wang Fei, Wang Wei(Intelligent Equipment Laboratory, Xidian University, Xfan, Shaanxi 710071, Chin)
出处
《光电工程》
CAS
CSCD
北大核心
2018年第1期73-79,共7页
Opto-Electronic Engineering
关键词
自动白平衡
暗通道
白色区域
automatic white balance
dark channel
white point region