摘要
针对制件在喷涂H06-101H底漆后进行湿布胶带法试验中出现的涂层脱落现象,结合该涂膜的氧化聚合干燥机理,对喷涂涂膜厚度控制在25μm以下,并采取在120℃干燥1h的烘烤条件,提升了该涂膜的湿结合力,顺利通过了湿布胶带法检测。
Aiming at the paint film shedding phenomenon in soaking cloth tape method after spraying H06- 101H primer, combined with the oxidation polymerization drying mechanism of the film, we adopt measures to improve the wet bonding force of the film so that the soaking cloth tape method is successfully passed, such as the coating thickness of spray coating is controlled below 25 μm and drying one hour at 120 ℃.
作者
李距春
毛喆
孟祥斌
LI Ju-chun1, MAO Zhe2, MENG Xiang-bin1(1.Heat Treatment and Surface Treatment Plant, Baoding Xiangyang Aviation Precision Machinery Co., Ltd., Baoding 071000, Hebei, China; 2.Heat Treatment and Surface Treatment Plant, Zhengzhou Aircraft Equipment Co., Ltd., Zhengzhou 450005, Chin)
出处
《现代涂料与涂装》
CAS
2018年第3期44-45,48,共3页
Modern Paint & Finishing
关键词
底漆
湿布胶带法
氧化聚合
湿结合力
primer
soaking cloth tape method
oxidation polymerization
wet bonding force
