摘要
研究了PVC树脂型号、增塑剂种类与用量、超细活性碳酸钙用量对PVC密封条抗析出性能的影响。试验得出的配方为:PVC S-1300,100份;钙锌稳定剂,4.5份;聚酯增塑剂B,80~85份;超细活性碳酸钙,5份;润滑剂,适量。实际加工试验结果表明:采用该配方所生产的密封条表面光滑,具有较好的拉力和弹性,各方面性能均满足用户要求。
The effects of PVC resin type, type and amount of plasticizer, and ultrafine activated calcium carbonate amount, on the migration resistance of PVC sealing trips were studied. The obtained formula was PVC S -1300 100, Ca/Zn stabilizer 4.5, polyester plasticizer B 80 -85, ultrafine activated calcium carbonate 5 parts and proper lubricants. The actual processing test results showed that the sealing strips produced by the formula had smooth surface, good tensile force and elasticity, and all aspects of properties met user's requirements.
作者
刘容德
李静
刘浩
张桦
LIU Rongde;LI Jing;LIU Hao;ZHANG Hua(Research Institute of Qilu Branch Co. , SINOPEC, Zibo 255400, Chin)
出处
《聚氯乙烯》
CAS
2018年第3期25-28,共4页
Polyvinyl Chloride
关键词
PVC树脂
密封条
增塑剂
析出增塑剂
PVC resin
sealing strip
plasticizer
migration plasticizer