期刊文献+

伏安极谱法同时测定海水中的铜、镉、铅、锌

Voltammetry Method is Used to Determine Copper, Cadmium, Lead and Zinc in Seawater
下载PDF
导出
摘要 建立伏安极谱法同时测定海水中铜、镉、铅、锌的方法。方法:海水于-1.15V恒压电解,通过标准加入法对海水中铜、镉、铅、锌进行定量。结果:方法检出限为0.06—0.99μg/L,定量限为0.50—10.00μg/L,回收率为80.40—105.8%。方法具有灵敏度高、抗干扰性能强、操作简便等特点,并且满足海水中铜、镉、铅、锌的监测分析要求。 A method for determination of copper, cadmium, lead and zinc in seawater was established. Methods: the seawater was electrolyzed by -1.15V constant pressure, and the copper, cadmium, lead and zinc in seawater were quantified by standard addition method. Results: the detection limit of the method was 0.06-0.99, g/L, and the quantitative limit was 0.50-10.00, and the recovery rate was 80.40-105.8%. The method has the characteristics of high sensitivity, strong anti-interference performance and simple operation, and meets the requirements of monitoring and analysis of copper, cadmium, lead and zinc in seawater,
作者 贺舒文 刘莹 赵超 杨绍晖 刘佳成 王首壹 He Shuwen,Liu Ying,Hong BinHe Shuwenl,Liu Ying,Zhao Chao,Yang Shaohui,Liu Jiacheng,Wang Shouyi(Dalian Entry-Exit Inspection and Quarantine Bureau, LiaoNing DaLian 11640)
出处 《现代科学仪器》 2017年第5期130-134,共5页 Modern Scientific Instruments
关键词 伏安极谱法 海水 Voltammetry Seawater Copper Cadmium Lead Zinc
  • 相关文献

参考文献3

二级参考文献20

  • 1陈清敏,张晓军,胡明安.大宝山铜铁矿区水体重金属污染评价[J].环境科学与技术,2006,29(6):64-65. 被引量:21
  • 2利锋,韦献革,余光辉,温琰茂,何树悠,张磊,骆海萍,黄雁云,任露陆.佛山水道底泥重金属污染调查[J].环境监测管理与技术,2006,18(4):12-14. 被引量:25
  • 3江晓蕾,缪建洋.石墨炉原子吸收法测海水中Cu、Pb、Cd方法的改进[J].污染防治技术,1996,9(1):55-57. 被引量:3
  • 4周怀东,彭文启.水环境与水环境修复[M].北京:化学工业出版社,2005.
  • 5Elzbieta (Ela) Bakbwska.应用ICP-MS技术和EPA200.8标准方法分析饮用水和污水样品[J]环境化学,2001(06).
  • 6李宁.阳极溶出伏安法快速连续测定海水中铅镉[A]《河北环境科学》-华北五省市环境科学学会第十七届年会论文集,2011.
  • 7GB/T 17378.4-1998.海洋监测规范 第4部分: 海水分析[S],1998.
  • 8Gustaf Forsberg, Jorome W.O' Laughlin, Robert G Megargle S. R. Koirlyohann. Anal. Chem. 47, 9, 1586 (1975).
  • 9Vydra. F. Electrochemical Stripping Analysis, Halsted Press(1976).
  • 10Kaplin, A. A. et al., Zavod. Lab. 43, 385(1977).

共引文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部