摘要
为研究液压支架在不同支护高度和不同顶板压力下力传递特性,利用动力学仿真软件Adams建立液压支架仿真模型,其立柱和平衡千斤顶采用弹簧阻尼系统等效代替。通过对不同支护高度的液压支架分别施加不同大小载荷,分析了不同支护高度和不同顶板压力对液压支架各铰接点、立柱和平衡千斤顶受力的影响。
In order to study the force transfer＇s characteristics of hydraulic support under different support height and different roof pressure, using the dynamic simulation software Adams to establish the hydraulic support simulation model, and its column and balanced jack are replaced by spring damping system. The influence of different support height and different roof pressure on the stress of each hinge point, column and balance jack of hydraulic support is analyzed by applying different load on different support high.
作者
曾庆良
杨春祥
刘鹏
孟昭胜
ZENG Qing-liang, YANG Chun-xiang, LIU Peng, MENG Zhao-sheng(College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266590, Chin)
出处
《煤炭技术》
CAS
2018年第4期187-189,共3页
Coal Technology
基金
国家自然科学基金资助项目(51674155)
山东省自然科学基金资助项目(ZR2014EEM021)
山东省科技发展计划课题(2014GGX103043)
关键词
液压支架
变高度
变载荷
力传递
hydraulic powered support
variable height
variable load
force transmission
