摘要
采用恒流极化、LSV、拉伸实验研究了掺杂不同含量的Ce对低锑铅合金电极电位以及力学性能的影响。并对极化试样的耐腐蚀性进行了分析。结果表明：加入1.0wt%Ce后,Pb-Sb合金的抗拉强度提高33.6%;由于Ce能降低析氧电位,使得Pb-Sb合金的阳极电位有下降。Ce是很好的阳极改性剂,具有较好的工业应用前景。
The effects of different Ce additions on the electrode potential and mechanical property of low antimony leadalloy were investigated by constant-current polarization, LSV and tensile testing. The corrosion resistance of the polarizationsamples was analyzed. The results show that after adding 1.0wt% Ce, the tensile strength of Pb-Sb alloy improves by 33.6%.The anode potentials of Pb-Sb alloy decline due to the reduction of oxygen evolution potential by Ce. Ce is a good anodemodifier, which has a good industrial application prospect.
作者
戴炳蔚
于杰
周晓龙
刘克伟
DAI Bingwei, YU Jie, ZHOU Xiaolong, LIU Kewei(Key Laboratory of Advance Material of Rare Precious and Nonferrous Metals, Education Ministry of China, Key Laboratory of Advanced Materials of Yunnan Province, Kunming University of Science and Technology, Kunming 650093, Chin)
出处
《热加工工艺》
CSCD
北大核心
2018年第4期89-92,95,共5页
Hot Working Technology
基金
稀贵金属综合利用新技术国家重点实验室开放课题资助(SKL-SPM-201510)
关键词
锌电积
铈
铅稀土合金
阳极电位
zinc electrowirming
cerium
lead i＇are earth alloy
anode potential
