摘要
Hillock Sn whiskers in Sn0.3Ag0.7Cu solder are investigated in 20 seconds in corrosive climate(95% methanol and 5% nitric acid),and the growth mechanism of hillock Sn whiskers is studied.The results indicate that hillock Sn whiskers are formed near the interface of Sn0.3Ag0.7Cu/Cu solder joints,and small corrosion pits provide conceive sites for Sn whiskers. Moreover,compressive stress induced by IMC reaction and oxidation for the whisker growth may be suggested as the driving force.
Hillock Sn whiskers in Sn0.3Ag0.7Cu solder are investigated in 20 seconds in corrosive climate(95% methanol and 5% nitric acid),and the growth mechanism of hillock Sn whiskers is studied.The results indicate that hillock Sn whiskers are formed near the interface of Sn0.3Ag0.7Cu/Cu solder joints,and small corrosion pits provide conceive sites for Sn whiskers. Moreover,compressive stress induced by IMC reaction and oxidation for the whisker growth may be suggested as the driving force.
基金
Supported by the National Natural Science Foundation of China(No.51475220)
the State Foundation of Laboratory of Advanced Brazing Filler Metals & Technology(Zhengzhou Research Institute of Mechanical Engineering)(No.SKLABFMT-2015-03)
High Level Talent Plan of Jiangsu Normal University(No.YQ2015002)
