摘要
近年来,伴随着污水厂建设数量的不断增多,往往忽略了污水处理厂的工艺调试工作,从而造成水质水量发生波动,进而影响污水厂的正常运行。因此,有必要做好污水处理厂运营后的工艺调试及运行管理工作。本文结合笔者多年来的相关工作经验,就污水处理厂CASS工艺的调试以及运行方式进行分析,以供读者参考。
In recent years, the number of wastewater treatment plants has been increasing. After the completion of the wastewater treatment plant, the commissioning work of the wastewater treatment plant was neglected, causing fuctuations in the quality of water and water, and affecting the normal operation of the wastewater treatment plant. Therefore, we need to do a good job. Sewage treatment plant process debugging and operation. Based on the author’s work experience, this article analyzes the commissioning and operating modes of the CASS process in the sewage treatment plant for readers’ reference.
作者
李镇秋
Li Zhenqiu(Guangzhou Development Zone Water Purifcation Management Center,Guangzhou Guangdong 510730, China)
出处
《环境与发展》
2018年第4期58-58,60,共2页
Environment & Development
关键词
污水处理厂
环境监测
污染监测
CASS工艺
运行方式
Sewage treatment plant
Environmental monitoring
Pollution monitoring
CASS process
Operation mode