摘要
为解决某矿浇筑混凝土强度低、易开裂和抗渗能力不足的问题,采用抗压、抗折、抗渗和微膨胀性能试验方法,分析了不同掺量的FZ-H80浇筑水泥基外加剂对浇筑混凝土力学性能的影响,解释了增强作用机理,并利用温度传感器对浇筑混凝土内部温度进行监测。结果表明:掺量为12%的浇筑水泥基外加剂为最佳配比,抗压和抗折强度增长率分别为10.7%和14.6%、膨胀率为0.28%、抗渗级别达到S34;浇筑混凝土井壁内外温差在合理范围内,表面致密光滑未出现开裂渗水现象,支护效果显著。
In order to solve the problem of low strength, easy cracking and impermeability of pouring concrete in a coal mine, with the test methods of anti-pressure, anti-folding, anti-permeability and micro-expansion, the influence of different dosage of FZ-H80 cement-based additives on the mechanical properties of concrete was analyzed. The mechanism of reinforcement is explained,and temperature sensor is used to monitor the temperature of concrete. The results show that: the dosage of pouring 12% cementbased admixture is the best ratio, anti-pressure and anti-folding strength growth rate is 10.7% and 14.6% respectively, the inflation rate is 0.28%, permeability level reaches to S34; the internal and external temperature difference of the concrete wall is within a reasonable range, and there is no cracking and seepage phenomenon on the surface, and the support effect is remarkable.
作者
闫旭
王鹤
李延辉
张付涛
YAN Xu;WANG He;LI Yanhui;ZHANG Futao(School of Mining and Safety Engineering, Shandong University of Science and Technology, Qingdao 266590, China;Shandong Ark New Materials Co., Ltd., Tai'an 271026, China)
出处
《煤矿安全》
CAS
北大核心
2018年第4期61-64,共4页
Safety in Coal Mines