AlSi+CoCrAlY复合涂层对MAR-M247合金力学性能的影响
Mechanical Properties Effect of AlSi+CoCrAlY Coating on MAR-M247 Alloy
摘要
采用AlSi+CoCrAlY复合涂层能更好地满足MAR-M247合金的高温防护要求。利用试验方法研究AlSi+CoCrAlY复合涂层对MAR-M247合金高温拉伸和疲劳性能的影响,为AlSi+CoCrAlY复合涂层的可靠使用和工程应用提供数据支持。
出处
《航空维修与工程》
2018年第4期60-62,共3页
Aviation Maintenance & Engineering
参考文献3
-
1崔彤,王磊,吕俊英,杨洪才,赵光普.GH586合金高温下低周疲劳断裂行为[J].钢铁研究学报,2003,15(z1):21-23. 被引量:5
-
2杨铁洪,王德志,程仕平.GH4033镍基合金高温低周疲劳行为的研究[J].金属热处理,2006,31(7):26-28. 被引量:9
-
3王东林,李家宝,金涛,魏政,胡壮麒,付立群,刘世锋.利用喷丸再结晶方法提高K417合金的疲劳寿命[J].稀有金属材料与工程,2006,35(8):1294-1298. 被引量:12
二级参考文献27
-
1宋如竹,向奇志,蔡晶.镍基高温合金GH4049高温疲劳小裂纹扩展规律[J].金属热处理,2005,30(11):38-40. 被引量:3
-
2[3]Sims CT,Stolof NS,Hagel WC.Superal loysⅡNewYork:John Wiky&Sons,1987
-
3[4]Xie S S,Wang T L,Lu J Y,ed al.Mater Sci Tech,1999,15 (5):411-414
-
4[6]Malakondaiah G,Nicholas T.Metdlurgicd and Materials Transactions,1995,26A:1113-1121
-
5[8]Gleiter H,Hombogn E.Phys Strratus Sollidi,1995,12:235.
-
6[10]Lerch B A,Noebe R D Metallurgical and Meterials Transac-tions,1994,25A:309-319
-
7Chen L J,Wang Z G,Yao G,Tian J F.The influence of temperature on low cycle fatigue behavior of nickel base superalloy GH4049[J].International Journal of Fatigue,1999,21:791-797.
-
8Marchionni M,Osinkolu G A,Onofrio G.High temperature low cycle fatigue behavior of UDIMET 720 Li superalloy[J].International Journal of Fatigue,2002 (24):1261-1267.
-
9Yang Yike(杨宜科) et al. High Temperature Strength andExperiment of Metals( 金属调温强度及试验)[M]. Shanghai:Shanghai Science and Technology Press,1986
-
10Collins J A. Failure of Materials in Mechanical Design- Analysis, Prediction and Prevention[M]. New York: John Wiley and Sons,1981
共引文献18
-
1张国会,郭绍庆,黄帅,周标,张学军.激光选区熔化制备GH4169合金高温疲劳行为研究[J].应用激光,2020,40(6):984-990. 被引量:5
-
2马晋芳,胡兰青,许并社.高能喷丸过程中的物质转移现象[J].稀有金属材料与工程,2007,36(4):744-746. 被引量:7
-
3冯学锋.DYLS1800双动滑阀导轨螺栓断裂故障原因分析[J].通用机械,2007(5):46-49. 被引量:3
-
4吴小梅,李建平,蔡妍,张鹏飞,何利民.NiCrAlYSi涂层对DZ125合金力学性能的影响[J].装备环境工程,2009,6(5):4-6. 被引量:2
-
5吴小梅,贺世美,李建平,何利民.EB-PVD热障涂层对IC10合金力学性能的影响[J].航空材料学报,2009,29(6):77-80. 被引量:10
-
6刘海雷,龙霓东,何卫锋,李玉琴,李伟,李启鹏.渗铝对K417激光冲击强化效果的影响[J].中国激光,2010,37(10):2658-2661. 被引量:3
-
7张仕朝,于慧臣.GH3044的低周疲劳行为研究[J].失效分析与预防,2012,7(1):6-10.
-
8王宗仁,杨军,陈宇,张卫方.载荷对高温合金GH4169/K417间接触热导影响[J].稀有金属材料与工程,2013,42(5):1033-1037. 被引量:4
-
9王欣,尤宏德,赵金乾,杨清,汤智慧.喷丸对DD6单晶合金高温疲劳性能的影响[J].中国表面工程,2013,26(3):21-24. 被引量:13
-
10邱高松,朱慧荣,高宏波.反复镦拔对Ni-20Cr-11Co-8Mo-4W合金组织和性能的影响[J].金属热处理,2015,40(2):124-126. 被引量:3
-
1刘铭灿,盛光敏,焦英俊,何洪杰.焊接工艺对瞬时液相焊接头组织及性能的影响[J].金属热处理,2018,43(1):91-95.
-
2支金花,王裕,李继红,张敏.1Cr12Ni2W1MolV马氏体不锈钢的组织和高温力学性能[J].金属热处理,2018,43(3):68-71. 被引量:7
-
3苏娟华,邵鹏,任凤章.TA10钛合金的高温拉伸断裂极限[J].金属热处理,2018,43(4):24-28. 被引量:6
-
4赵艳霞,田晨颖,陈晓,由鹏飞,巩丽萍.UPLC-MS/MS法测定花生油和牛奶中黄曲霉毒素含量[J].食品与药品,2018,20(2):120-123. 被引量:4
-
5陈鑫卉,吕振涛,刘元伟,谢彦,朱本峰.一种含钨酸钠/滑石粉缓蚀剂储存器的新型复合防腐蚀涂层[J].腐蚀与防护,2018,39(4):270-273.
-
6窦丽,娟徐,呈唐,颖孙,利元.锆合金力学性能分析[J].科技视界,2017(35):39-40.
-
7杨保全.陶瓷涂层隔膜改性锂离子电池隔膜[J].合成材料老化与应用,2018,47(1):68-72. 被引量:15
-
8蔡步健,郑昌龙,张俊杰,黄建峰,曾令松,苍安国.基于ECER44设备实现ECER129侧向撞击能力的研究[J].机电工程技术,2018,47(3):22-25.
-
9江艳华,初钰博,王联珠,李风铃,翟毓秀,姚琳.黄渤海区鲜活贝类中副溶血性弧菌的毒力基因及耐药性分析[J].中国卫生检验杂志,2018,28(7):769-773. 被引量:9
-
10都凯,孟凡博,黄宏军,石明浩,袁晓光,左晓姣,董福宇.压力下凝固工艺参数对6061铝合金组织与力学性能影响[J].热加工工艺,2018,47(7):49-53. 被引量:1