原位聚合制备纳米SiO_2-全氟烷基丙烯酸酯改性丙烯酸酯乳液及性能研究

Synthesis and Properties of Nano-SiO_2-Perfluoroalkyl Acrylate Modified Acrylate Emulsion via In-Situ Polymerization

以异佛尔酮二异氰酸酯(IPDI)、甲基丙烯酸六氟丁酯(HFMA)、β-巯基乙醇(β-ME)、2-烯丙基醚-3-羟基丙烷-1-磺酸钠(UC-1)为原料合成聚合型乳化剂,进而以硅酸乙酯(TEOS)、甲基丙烯酸甲酯(MMA)、甲基丙烯酸环己酯(CHMA)、丙烯酸丁酯(BA)、2-(全氟辛基)乙基甲基丙烯酸酯(HDFDMA)为主要单体,过硫酸钾(KPS)为引发剂,通过乳液原位聚合法和半滴定法合成纳米SiO_2-含氟丙烯酸酯复合乳液。采用FT-IR、SEM、TG、水接触角仪等测试仪器对胶膜的结构、热稳定性和耐水性进行表征。结果表明:当乳化剂用量为5.5%,含氟单体用量为12%及纳米SiO_2用量为2.2%时,胶膜的综合性能最佳,此时胶膜水接触角为122.3°,吸水率为3.9%,其热失质量5%时的分解温度为302℃,与纯丙烯酸酯胶膜相比,表现出优异的疏水性和热稳定性。

A polymerization emulsifier was synthesized with isophorone diisocyanate （IPDI）, hexafluorobutyl methacrylate （HFMA）, β-mercaptoethanol （t-ME）, 2-allyl ether -3-hydroxypropane-1-sulfonate （UC-1 ） as raw materials. Subsequently, the efficient nano- SiO2 perfluoroaerylate composite emulsion was synthesized from tetraethoxysilane（TEOS） , butylacrylate （ BA ）, methylmethacrylate （ MMA ）, 2- （ perfluorooctyl ） ethylmethaerylate （ HDFD- MA）, cyclohexyl methaerylate （CHMA） as main monomers and potassium prsulfate （KPS） as initiator via in-situ emulsion polymerization and semi-titration. The film structure, water resistance and thermal stability of the emulsion and film thereof were characterized respectively by FT-IR, SEM, TG and water contact angle tester. The results showed that when the amount of emulsifier was 5.5%, the amount of fluorinated monomer was 12% and the amount of nano- SiO2 was 2.2%, the film had the best comprehensive performance, moreover, the water contact angle was 122. 3°, and the water absorption was 3.9%, the heat decomposition temperature at 5% weight loss was 302 ℃. As compared with the pure acrylate film, it showed excellent hydrophobicity and thermal stability.