摘要
镀锌板自润滑涂层就是镀锌板表层拥有润滑性涂层,可以在机械加工中进行直接使用,有着较强的抗腐蚀性以及润滑性。本文对镀锌板自润滑涂层相关内容进行介绍,旨在为相关工作的顺利推进提供有利的理论支撑。
出处
《冶金与材料》
2018年第2期54-55,共2页
Metallurgy and Materials
参考文献3
-
1吴少华,石皋莲,段业宽,刘海青,刘秀波.不同温度下γ-NiCrAlTi/TiC/CaF_2自润滑耐磨复合涂层的摩擦磨损性能[J].热加工工艺,2014,43(20):88-92. 被引量:4
-
2杜蓉,涂元强,蔡捷,白会平,宋乙峰.自润滑镀层钢板的研究进展[J].武钢技术,2014,52(4):55-58. 被引量:9
-
3汪亚楠,张振海,孙晨阳,汤晓东,张千峰.自润滑涂层钢板的研究新进展[J].材料保护,2013,46(S2):147-148. 被引量:6
二级参考文献30
-
1朱文英.日本开发无铬表面处理钢板的进展[J].上海金属,2005,27(4):50-53. 被引量:5
-
2曹曙.NKK开发出高润滑性合金化热镀锌钢板PZA-N.上海金属,1999,.
-
3Liu XiuBo, Meng XiangJun, Liu HaiQing, et al. Development and characterization of laser clad high temperature self-lubricating wear resistance composite coatings on Ti-6AI-4V [J]. Materials and Design, 2014(55) : 404-409.
-
4Liu C M, Tian X J, Tang H B, et al. Surface engineering of Ti-6Al-4V by nitridingand powder alloying using CW CO2 laser [J]. Materials Science Technology, 2008(24) : 189-200.
-
5Liu XiuBo, Liu HaiQing, Liu YuanFu, et al. Effects of tempera- ture and normal load on tribological behavior of nickel-based high temperature self-lubricating wear-resistant composite coating [J]. Comoosites : Part B. 2013,53 : 347-357.
-
6Liu X B, Zheng C, Liu Y F, et al. A comparative study of laser cladding high temperature wear-resistant composite coating with the addition ofself-lubricating WS2 and WSJ (Ni-P) encapsulation [J]. Journal of Materials Processing Technology,2013,213 : 51- 58.
-
7Yan Hua, Wang Aihua, Xu Kaidong, et al. Development and characterization of laser surface cladding (Ti,W)C reinforced Ni-30Cu alloy composite coating on copper [J]. Optics & Laser Technology, 2012(44) : 1351 - 1358.
-
8Li Jianing, Chert Chuanong, Zong Lei. Microstructure charac- teristics of Ti3AI/TiC ceramic layer deposited by laser cladding [J]. Int. Journal of Refractory Metals and Hard Materials, 2011 (29) :49-53.
-
9Liu WenGang, Liu XiuBo, Zhang ZhenGuo, et al. Development and characterization of composite Ni-Cr-C-CaF2 laser cladding on ,-TiAlintermetalliealloy [J]. JournalofAlloysandComposite, 2009,470 : L25-L28.
-
10He X M, Liu X B, Wang M D, et al. Elevated temperature drysliding wear behavior of nickel-based composite coating on austenitic stainless steel deposited by a novel central hollow laser cladding [J]. Applied Surface Science [J]. Application Surface Science, 2011,258 : 535-541.
共引文献11
-
1石皋莲,吴少华,刘海青,段业宽,刘秀波.添加固体润滑剂WS_2的钛合金激光熔覆高温耐磨复合涂层组织与耐磨性[J].热加工工艺,2014,43(24):143-147. 被引量:4
-
2李淑梅,安成强,郝建军.镀锌板自润滑涂层的研究进展[J].电镀与精饰,2015,37(5):14-18. 被引量:8
-
3张爱萍,董学强,冉长荣.热镀锌无铬自润滑涂层及性能试验研究[J].表面技术,2016,45(6):36-41. 被引量:4
-
4赵晓非,苗雨芳,于冬云.自润滑处理热镀锌板的表面性能[J].材料保护,2017,50(1):5-9. 被引量:4
-
5高东强,王蕊,陈威,王哲.激光熔覆改善材料性能的研究进展[J].热加工工艺,2017,46(12):14-18. 被引量:22
-
6赵晓非,贾松,苗雨芳,黎敏,汪小培.自润滑热镀锌汽车板的性能分析[J].电镀与涂饰,2017,36(20):1069-1074. 被引量:4
-
7杜蓉,陈园林,雷泽红,白会平,涂元强.自润滑热镀锌板的耐腐蚀性能研究[J].材料保护,2018,51(3):124-126. 被引量:5
-
8尹红国.热镀锌环保自润滑产品卷取缺陷分析与控制[J].材料保护,2018,51(11):144-147. 被引量:2
-
9齐建群,孟凡月,孟根巴根,王浩宇,刘春波.自润滑涂层镀锌板的应用性能研究[J].河南冶金,2021,29(3):1-3. 被引量:1
-
10齐建群.两种汽车用自润滑镀锌板应用性能对比分析[J].江西冶金,2022,42(3):29-35.